Mobius M9 SORTER User Manual
Hide thumbs
Also See for M9 SORTER:
- User manual (18 pages) ,
- User manual (30 pages) ,
- Assembly (4 pages)
Related Manuals for Mobius M9 SORTER
Summary of Contents for Mobius M9 SORTER
- Page 1 M9 SORTER USER GUIDE v1.1 ©2024 Eteros Technologies inc. All rights reserved. | mobiustrimmer.com...
-
Page 2: Table Of Contents
WARRANTY..................................7 INITIAL SETUP................................... 8 ASSEMBLY & INSPECTION..........................8 REMOVE AND INSTALL BELTS AND ROLLERS................. 10 INITIAL SETUP..................................13 GET TO KNOW YOUR MOBIUS M9 SORTER..................13 WHAT'S IN THE BOX............................15 GENERAL OPERATION............................16 CLEANING & MAINTENANCE..........................18 CLEANING.................................. 18 PREVENTATIVE MAINTENANCE........................18 SPECIFICATIONS................................19... -
Page 3: Introduction
INTRODUCTION This User Guide is a comprehensive manual covering the operation and maintenance of the M9 Sorter machine as of the date of publication. ETEROS TECHNOLOGIES reserves the right to make updates to the machine from time to time. In the event of an update, this User Guide will remain appropriate for the safe operation and maintenance of your unit. -
Page 4: Safety Instructions
All operators must read and understand this User Guide and be trained in safe operation and use of the M9 SORTER. We recommend the owner of this equipment develop a standard operating procedure specific to each worksite to address any local hazards or other conditions not outlined in this User Guide. -
Page 5: General Safety Precautions
WEAR PROPER APPAREL Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that may get caught in moving parts. Non-slip footwear is recommended. Wear a protective hair covering to contain long hair. MOBIUS M9 SORTER USER GUIDE 4... - Page 6 Any damaged part including guards should be properly repaired or replaced. ALWAYS WEAR EYE PROTECTION Safety goggles can protect your eyes from fast-moving debris. ALWAYS WEAR EAR PROTECTION Wear ear muffs or earplugs when operating loud machinery. MOBIUS M9 SORTER USER GUIDE 5...
-
Page 7: Services & Repairs
(service technician). Should the need arise, please notify us: ETEROS TECHNOLOGIES 26 Industrial Ave. Carleton Place Ontario, Canada K7C 3T2 www.eteros.com 1.866.874.6244 Improper interfacing, improper repair, or unauthorized modification could result in void warranty claims. MOBIUS M9 SORTER USER GUIDE 6... -
Page 8: Warranty
Any damage that occurs during shipping will be the responsibility of Eteros Technologies. The above terms are valid if Mobius equipment is used and maintained as directed. If the equipment is modified in any way, all terms of this warranty are void. This warranty does not apply to cosmetic damage, such as scratches or general wear and tear. -
Page 9: Initial Setup
Inspect the crate and crate contents to ensure no damage occurred during shipping. 2. Carefully remove M9 Sorter from crate. 3. The Adjustment Blocks are fastened to the interior of the body during shipping. To install, they will need to be removed using a 5/16 hex bit or Allen Key to loosen off the bolts on the exterior of the body. - Page 10 5. Attach Slide-Outs by hooking them onto the edge of the Slide Out Table. This will allow Slide-Outs to be adjustable. 6. Once initial assembly is complete, inspect the M9 Sorter to confirm that it is ready to operate: Confirm the power cord is in good condition.
-
Page 11: Remove And Install Belts And Rollers
4. If the supports aren't removed, the operator will not be able to disassemble the belts off for cleaning. REMOVE AND INSTALL BELTS AND ROLLERS Unplug the machine. 2. Remove the overflow shelf and side panels. MOBIUS M9 SORTER USER GUIDE 10... - Page 12 Note: Removing the rollers can be done with or without the belts in place. As long as there isn’t any tension on the belts, it’s easy to work around them. MOBIUS M9 SORTER USER GUIDE 11...
- Page 13 11. Once all of the rollers and belts are in place, pull the adjustment plunger and lower the tension assembly to the desired position. 12. Close up the tailgate, and replace the side panels and overflow shelf. MOBIUS M9 SORTER USER GUIDE 12...
-
Page 14: Initial Setup
INITIAL SETUP GET TO KNOW YOUR MOBIUS M9 SORTER MOBIUS M9 SORTER USER GUIDE 13... - Page 15 MOBIUS M9 SORTER USER GUIDE 14...
-
Page 16: What's In The Box
WHAT'S IN THE BOX Your M9 Arrives With The Following Components: Your Mobius M9 Sorter comes lightly assembled, tested, and ready for operation. When unpacking the device, please ensure the following items are included: M9 Sorter Machine 2. Shelf 3. Slide-Outs 4. -
Page 17: General Operation
7. Press the Start Button (green button) on the HMI screen which will start the motor. When active, the Start button will be illuminated. 8. Press the up arrow on the HMI Screen to increase the speed of the belts. MOBIUS M9 SORTER USER GUIDE 16... - Page 18 9. Adjust Hopper to allow for flow of material onto the belts. 10. Adjust Slide-Outs to desired sizing. 11. When totes are full, press the STOP on the HMI to stop belts from turning during tote changeover. MOBIUS M9 SORTER USER GUIDE 17...
-
Page 19: Cleaning & Maintenance
2. Eteros recommends cleaning the inside of the machine on a regular basis. 3. Eteros recommends de-tensioning the belts when the machine is not in use. This will help extend their service life by avoiding any unnecessary stretch or strain of the belts. MOBIUS M9 SORTER USER GUIDE 18... -
Page 20: Specifications
DIMENSIONS 30" W x 88″ L x 46.5" H WEIGHT 610 LBS 120 V, 1.5 A (North America) POWER REQUIREMENT 240 V, 0.7 A (international) WET/DRY CAPABLE CONSTRUCTION Anodized Aluminum & 304 Stainless Steel MOBIUS M9 SORTER USER GUIDE 19...
Need help?
Do you have a question about the M9 SORTER and is the answer not in the manual?
Questions and answers