UBCO 2x2 Assembly, Servicing And Maintenance Instructions

2x2 Servicing and
Maintenance
While the UBCO 2x2 has fewer moving parts than a typical combustion engine vehicle,
they still require maintenance and servicing to ensure continued and safe operation.
S E R V I C I N G
Regular servicing should only be carried out by an
UBCO certified Service Agent or Dealer. Insist on
only genuine UBCO parts being installed in your 2x2
to ensure validity of the warranty.
Your first service is free!
After the first 10 hours of riding, you qualify for an
initial complimentary check over of your bike. This is
performed by the dealer who you purchased the bike
from. Or if you purchased direct from UBCO, please
get in touch via sales@ubcobikes.com.
UBCO bikes are powered by a large lithium-ion
battery — sturdy and robust enough to do the
hard yards. But like with any battery, it'll gradually
degrade and reduce in charge capacity over time.
For UBCO riders, our app shows you the general
health of your battery with an indication of the
charge level. Depending on the battery, it will usually
take 4 to 6 hours to charge the battery from flat to
full.
Battery performance and lifespan is dependent on
many factors from everyday usage to environmental
conditions. However, the depth of discharge (battery
% drained), and how it is used will always affect
the battery performance. For normal use, an UBCO
battery should run at prime performance for 800
full discharge cycles (meaning from 100% to 0%
charge) or about five to six years, before you may
notice a slight decrease in capacity.
Standard use service schedule
Your 2x2 should be serviced at the indicated mileage
or time, whichever occurs first. The service schedule
alternates between Intermediate (every 6 months or
4000km) and Full (every 12 months or 8000km).
•
10 weeks / 2,000km / 1,242mi
•
6 months / 4,000km / 2,485mi (Full Service)
•
12 months / 8,000km / 4,970mi
•
18 months / 12,000km / 7,456mi (Full Service)
•
24 months / 16,000km / 9,941mi
R I D E R R E S O U R C E S
Once you have completed your 24-month service, we
recommend you continue to get your 2x2 serviced
every six months.
Heavy use service schedule
Heavy use conditions such as farming require
a more robust maintenance schedule. Your 2x2
should be serviced at the indicated mileage or
time, whichever occurs first. The service schedule
alternates between Intermediate (every 3 months
or 1500km) and Full (every 6 months or 3000km).
•
After 10 hours: First Complimentary Service
•
4 months / 100hrs / 1,500km / 932mi
•
7 months / 200hrs / 3,000km / 1,864mi
(Full Service)
•
10 months / 300hrs / 4,500km / 2,796mi
•
13 months / 400hrs / 6,000km / 3,728mi
(Full Service)
•
16 months / 500hrs / 7,500km / 4,660mi
•
19 months / 600hrs / 9,000km / 5,592mi
(Full Service)
•
22 months / 700hrs / 10,500km / 6,524mi
•
25 months / 800hrs / 12,000km / 7,456mi
(Full Service)
Once you have completed your 25-month service,
we recommend you continue to get your 2x2
serviced every three months. For specific service
requirements tailored to your situation, please
contact your UBCO certified service technician
What's the difference between a full service and
intermediate service?
For both Full and Intermediate Services the
technician will run your bike through a standard
set of checks, both mechanical and electrical, and
ensure the bike's firmware is all up to date. They will
also complete a test ride to confirm everything is
operating as it should. A full service also includes a
complete motor service including an inspection and
re-lube of both motors.
2 × 2 S E R V I C I N G A N D M A I N T E N A N C E