UBCO 2X2 WORK Quick Start Manual
Hide thumbs
Also See for 2X2 WORK:
- User manual ,
- Assembly, servicing and maintenance instructions (5 pages) ,
- Manual (2 pages)
Advertisement
Quick Links
PRERIDE
CHECKLIST
Before you head out on your 2X2, always
check that your bike is ready to ride.
1. Check your power supply is
sufficiently charged.
2. Ensure the battery strap and
plug are secured tightly.
3. Ensure the lights are working:
headlight and rear lights.
4. Test the brakes & the horn
are functioning properly.
5. Check the tyre pressure;
inflate if needed.
6. Do a physical check to
ensure all nuts, bolts, and
fixings are tight and all loads
are secure.
7. Always wear a helmet and
appropriate clothing and
footwear.
ubcobikes.com
info@ubcobikes.com
@ubcobikes #ubco2x2
2
6
4
3
1
UBCO 2X2 WORK BIKE
5
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for UBCO 2X2 WORK
Summary of Contents for UBCO 2X2 WORK
- Page 1 6. Do a physical check to ensure all nuts, bolts, and fixings are tight and all loads are secure. 7. Always wear a helmet and appropriate clothing and footwear. ubcobikes.com UBCO 2X2 WORK BIKE info@ubcobikes.com @ubcobikes #ubco2x2...
- Page 2 3a. Install the power supply achieve the correct tightness. A IMPORTANT: inspect the power supply; contact UBCO if there is any transit damage. Torque to 15Nm, if available. A If the power supply is not already in place, remove the battery strap from the frame and set Power Supply aside.
Need help?
Do you have a question about the 2X2 WORK and is the answer not in the manual?
Questions and answers