Related Manuals for KoamTac SmartSled KDC1000
Summary of Contents for KoamTac SmartSled KDC1000
- Page 1 KDC1000/1100 Quick Guide 100 Village Blvd, Suite 300, Princeton, NJ 08540 USA ©2024 KOAMTAC, Inc. T: + 1-609-256-4700 QG_KDC1000/1100_20240621 info@koamtac.com www.koamtac.com...
-
Page 2: Table Of Contents
UHF Reader Companion Usage ........................21 Read RFID tag and Barcode with trigger: Trigger mode ................ 21 Toggling the Read Mode: Barcode Mode vs. UHF mode ..............21 Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p1... - Page 3 Bluetooth ..............................40 10.8 HID Initial Delay ............................40 10.9 HID Character Delay ........................... 41 10.10 System ..............................41 10.11 OTG/Bluetooth (Android & iPhone15) ....................42 Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p2...
- Page 4 KDC1000/1100 Quick Guide Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p3...
-
Page 5: Product Concept
MSR (Magnetic Swipe Reader) Companion – payment through MSR card or membership management through loyalty card o mPOS (Mobile POS) Companion – payment through Chip&Pin, MSR, and Contactless (NFC) Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p4... -
Page 6: Key Features
MSR & mPOS Companion c) Custom Smart Case for simultaneous charging o One USB charging port (or charging cradle) charges both KDC1000/1100 and smartphone. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p5... -
Page 7: Product Introduction
The KDC will beep when it is turned ON. c) Press and hold the left SCAN button and right SCAN button simultaneously for 3 seconds again to turn off the KDC. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p6... -
Page 8: How To Install/Uninstall The Smart Device Into The Integrated Case (Android/Ios)
Pull top of case over device. d) To remove, bend top of SmartSled Case back (careful not to bend smart device) and slide device out. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p7... -
Page 9: How To Connect Pc With Kdc Or Phone
Then KDC1000/1100 bypasses the communication path to the phone from PC so that you can access the phone from PC. To reconnect KDC1000/1100 to phone, scan below barcode. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p8... -
Page 10: Connection Method Between Kdc And Phone
USB CDC and USB MFi. USB CDC is for connecting to Android Phone and USB MFi for connecting to iPhone 15. The following barcodes are USB CDC and USB MFi selection barcodes. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p9... -
Page 11: Usb Hid Mode
If you need to switch back into USB HID Mode from USB Serial Mode, scan this barcode: USB HID Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p10... -
Page 12: Serial Mode
Serial communication is the only option iPhone 13 and 14 and does not support HID keyboard. 3.4 Bluetooth Mode The KDC1000/1100 communicates with Phone via Bluetooth when Bluetooth Mode is selected. The KDC1000/1100 does support Bluetooth Low Energy V5.0. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p11... -
Page 13: Bluetooth Pairing
KDC only transmits data to the Windows PC. Note: HID inputs data directly into an application. SPP requires the KOAMTAC KTSync® app or integration of KOAMTAC SDK to input data into an application. To gain access to the SDK, please complete the form here: https://www.koamtac.com/sdk/... - Page 14 KDC1000/1100. KDC1000/1100 will beep upon connection. Now it is ready to use. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p13...
-
Page 15: Usage
To test your connection, scan any barcode. If the connection is successful, the barcode data will display on the screen. (Fig. 3) < Fig. 1 > < Fig. 2 > < Fig. 3 > Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p14... - Page 16 KDC1000/1100[xxxxxx] [BLE], where xxxxxx is the serial number. e) The KDC1000/1100 will beep upon connection. Now it is ready to use. < Fig. 4> Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p15...
-
Page 17: Using Ktsync Keyboard - Android
Select ‘choose input method’ and you can select the default keyboard from here. (Fig. 6) < Fig. 5 > < Fig. 6 > Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p16... -
Page 18: Using Ktsync Keyboard - Ios
Select the KTSync Keyboard and begin scanning. (Fig. 9) < Fig. 9> Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p17... -
Page 19: Using Other Developed Applications With Sdk - Android/Ios
Quick Guide 5.5 Using other developed applications with SDK – Android/iOS A Software Development Kit (SDK) for Android and iOS is available to all KOAMTAC customers to ensure smooth development of applications that work seamlessly with a KDC scanner. It’s easy to request the SDK from the... -
Page 20: Uhf Reader Companion
KDC1000/1100 Quick Guide UHF Reader Companion 6.1 KDC1000/1100 1.0W UHF Reader Diagram * 1.0W UHF Reader mounted to KDC1000 Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p19... -
Page 21: Kdc1000/1100 0.5W Uhf Reader Diagram
KDC1000/1100 Quick Guide 6.2 KDC1000/1100 0.5W UHF Reader Diagram * 0.5W UHF Reader mounted to KDC1000 Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p20... -
Page 22: Uhf Reader Companion Usage
1) Press below combinations of SCAN button in 3 seconds. <Left Scan><Left Scan><Right Scan><Right Scan><Left Scan><Right Scan> 2) Change from within the application using SDK Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p21... -
Page 23: Changing The Uhf Read Tag Modes: Single, Multiple, Or Active
Ac tive M ode (E na ble) Ac tive M ode (D is a ble) M ultiple M ode S ingle M ode Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p22... - Page 24 If you need to scan with the trigger depressed for more than 10 minutes, you need to disable the Active Read 10 Minute Timeout. Active Read 10 Minute Timeout E na bled (D efa ult) D is a bled Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p23...
-
Page 25: Uhf Tag Counting (Beep Count)
This option allows the user the option to charge their phone via the extended battery contained inside the pistol grip. • Enabled (Default): Phone charging from the extended battery is enabled. • Disabled: Phone charging from the extended battery is disabled. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p24... - Page 26 KDC1000/1100 Quick Guide E na bled (D efa ult) D is a bled Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p25...
-
Page 27: Kdcuhf Demo App (Tag Read/Write Demo)
2. Start KDCUHF you just installed then KDCUHF is trying to connect with KDC among paired KDC list. 3. If you want to connect to the specific KDC, please use the menu “Connect” from KDCUHF. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p26... -
Page 28: Read Uhf Data
A piece of EPC No. The total amount which includes the data Total Tag being repeatedly read. Total Time Total time it takes from start point, in ms. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p27... -
Page 29: Select Uhf Tag
4. Choose one UHF tag to do manual operation and tap on “Select”. 5. If successful, you’ll see the toast message at the bottom saying, “Selecting Tag Succeeded”. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p28... -
Page 30: Read Or Write Uhf Tag
WriteUHFTagMemory(byte[] pwd, UHFMemoryBank bank, int start, int length, byte[] data, UHFStatus status) 2. You can check the guide document in the SDK package: KDC SDK Guide for Android.pdf Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p29... -
Page 31: Lock Uhf Tag
It might be invalid to lock the tag with the default password. Please modify the access password first before locking 3. Choose memory bank and action (unlock, lock, permanent…) and tap “Lock” button on “Lock Tag” menu. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p30... -
Page 32: Kill Uhf Tag
It is not possible to kill tags with default kill password. Please modify the kill password first. 3. Tap “Kill” button on “Kill Tag” menu. Killed tags are no longer available. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p31... -
Page 33: Uhf Setting
10. Stop Active Read “Active Read” function stops after a certain period of time. 11. RFID beep count Select read beep count of KDC. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p32... - Page 34 Determine whether read tag data is stored or not. 13. Charging Phone Enable or Disable “Charging Phone” function when using 1.0W. 14. UHF ID Show the UHF module ID Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p33...
-
Page 35: Application Setting
ASCII mode. Characters that can’t be displayed are indicated by “^” and a two digit hex string. For example, 0x00 0xFF will be displayed ^00^FF. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p34... -
Page 36: Kdc Information
KDC1000/1100 Quick Guide 8.11 KDC Information Display the connected KDC information. Serial Number, Firmware Version, etc. Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p35... -
Page 37: Product Specifications
Postal Code / OCR Passport Yes / Yes (KDC1000C) RFID (HF Reader) Optional Companions RFID (UHF Reader) Optional (0.5W, 1.0W) Magnetic Strip Reader Optional Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p36... -
Page 38: W Uhf Reader
Output Power Range +0 to +27 dBm 100+ tags per second / 400,000+ Barcodes/RFID Tag Read Rate / Storage tags (EAN-13 or EPC Data) Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p37... -
Page 39: Appendix. Useful Special Barcodes
10.3 Data Process - Wedge/Store, Enter Key & Extend Key Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p38... -
Page 40: Data Process - Data Edit
10.6 Data Process – Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p39... -
Page 41: Bluetooth
Bluetooth Profile = HID iOS Bluetooth Profile = HID Normal Bluetooth Profile = MFi 10.8 HID Initial Delay HID Initial Delay = Disabled HID Initial Delay = 1second Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p40... -
Page 42: Hid Character Delay
HID Character Delay = 20msec HID Character Delay = 30msec HID Character Delay = 50msec HID Character Delay = 100msec 10.10 System Memory Status Reset Memory Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p41... -
Page 43: Otg/Bluetooth (Android & Iphone15)
KDC1000/1100 Quick Guide Reset BT Registry Display Version Factory Default KDC Reset 10.11 OTG/Bluetooth (Android & iPhone15) USB OTG Mode Bluetooth Mode Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional KDCs and accessories. QG_KDC1000/1100 p42... - Page 44 KOAMTAC devices and accessories are not medical devices and are not intended for use in any medical or inherently infectious setting, or where exposure to bodily or hazardous fluids may be expected, or where the risk of exposure through inhalation is high.
Need help?
Do you have a question about the SmartSled KDC1000 and is the answer not in the manual?
Questions and answers