Build with Robots Breezy Smart Controller User Manual page 6

Connecting to Wi-Fi - required if Controller doesn't have a SIM card
installed
Internet connectivity is required for creating or logging into an
account, scheduling fog events, and receiving app and firmware
updates. App updates will occur automatically if connected to Wi-Fi
or a SIM card is installed.
1. Power on the controller pressing and holding the power key for
about 5 seconds until the controller screen turns on.
2. Select settings from the
3. Enter 1234, then press OK.
4. Ensure "Use Wi-Fi" is ON and Select the desired Wi-Fi network.
5. Enter Wi-Fi password if needed and press CONNECT.
D001128 Rev A.4
icon on the main screen.
www.BuildWithRobots.com Page 6