Viewing Fogging Logs - Build with Robots Breezy Smart Controller User Manual

1. Press the desired fog time button of the four "Start xx Sec Fog"
buttons.
2. A countdown of 7 seconds to fogging will initiate. The Breezy
Blue waistband light will flash red, and there will be an audible
warning to leave the area. Press the Stop Fogging button on
the controller or the push button on the Breezy Blue to cancel
the fogging event.
3. When the countdown ends, fogging will begin. The Breezy Blue
waistband will turn solid red. Press the Stop Fogging button on
the controller or the push button on the Breezy Blue to cancel
the fogging event.
4. After fogging, the Breezy Blue device will enter a 10-minute fog
settling time indicated by a flashing yellow light on the
waistband.
5. When settling has completed, the Breezy Blue waistband will
return to a blue color, and the controller will display the four fog
time buttons. At this time, the area can be opened for
ventilation, and the HVAC system can be turned on to prepare
the area for re-entry. For more information on when the room is
safe to re-enter, refer to the Breezy BioCare RTU Instructions for
Use document.

Viewing Fogging Logs

The Fogging logs from all the Breezy Blue devices at the site can be
viewed at Cloud.buildwithrobots.com
Note: Fogging logs are only available up to the time of the last
instance the controller opened the Device control screen for each
Breezy Blue Device.
D001128 Rev A.4 www.BuildWithRobots.com Page 20