Fog Time - Build with Robots Breezy Smart Controller User Manual

Fog Time

Fog Time defines the amount of time Breezy Blue dispenses fog in the
area.
1. Fog Time is set to 30 seconds at the factory. It is updated each
time a fog event is started from one of the 4 buttons to the time
defined by the button. Note that when Breezy Blue is in the
disabled state, the buttons are named Set xx Sec Fog Time
instead of Start xx Sec Fog Time. Current Fog time is used by the
push button and schedule modes and is shown next to the tank
level icon.
2. A fogging time of up to 30 minutes can be configured by
holding one of the 4 buttons on the device control screen until
the controller vibrates then using the number scroll to select
minutes and seconds, and pressing "CONTINUE."
3. If the device is disabled, the new fog time is updated
immediately in the Current Fog Time. If the device is in any
other state, the Current Fog Time will be updated when a fog
event has been started using that button.
D001128 Rev A.4 www.BuildWithRobots.com Page 16