Subscribe to Our Youtube Channel
Related Manuals for Lockly Pro LOCKLY GUARD DEADBOLT 728W
Summary of Contents for Lockly Pro LOCKLY GUARD DEADBOLT 728W
- Page 1 INSTALLATION GUIDE PGD728WPU LOCKLY GUARD ™ DEADBOLT 728W For commercial use & professional installation www.LocklyPRO.com...
- Page 2 Welcome! This guide will walk you through step-by-step how to install and get your Lockly Guard up and running. Installation generally takes less than 30 minutes. If you have any questions please reference our online support at: LocklyPRO.com/support or call (669) 500-8835 for help.
- Page 3 Go to LocklyPRO.com/downloads to watch a video version of this installation guide. Scan the code on your phone to watch step-by-step video installation.
- Page 5 Preparation To complete the installation you will need: Tape measure or ruler Phillips Screwdriver Flathead Screwdriver Prepare door: remove existing deadbolt or use provided template to bore new holes. 2-⅜" (60mm) 2-¾" (70mm) 1-⅜" (35mm) Cross-bore to 2" (50mm) 2-⅛" (54mm) 1"...
- Page 6 Step 1 ADJUST DEADBOLT AND INSTALL Deadbolt slot must align to the center of the door hole. Adjust as shown if needed. 2-3/4" (70mm) or 2-3/8” (60mm) The deadbolt comes set to 2-3/4" (70mm). Adjust length to 2-3/8” (60mm) if necessary. (wear gloves to protect from possible pinching).
- Page 7 Step 1 ADJUST DEADBOLT AND INSTALL continued Extend the deadbolt by inserting a flat-head Insert the deadbolt into door edge hole. screwdriver into the slot and turning clock- make sure that the right side is up and the wise. slot is in the vertical position. Secure with 2 screws.
- Page 8 Step 2 INSTALLING EXTERIOR ASSEMBLY (B) Adhesive tape Check the exterior assembly (B) alignment to door hole and deadbolt before peeling off film on adhesive strips. Peel film from adhesive strips and make sure torque blade is in the vertical position with the deadbolt extended.
- Page 9 Step 3 INSTALLING INTERIOR ASSEMBLY (F) 1: Check interior mounting plate (D) 2: Align and secure mounting plate with alignment to your door hole before adhesive strips. Guide connection cables securing with adhesive strips. through the hole and secure to the lower left notched hole.
- Page 10 Step 4 PREPARING DOOR SENSORS FOR INSTALLATION Do not mount (install) door sensors yet. You will install in step 7. About door sensors Door sensors provide real-time door condition status, such as the ability to verify if the door is securely closed. It also sends push notifications to your phone whenever your door opens and enables voice control with Amazon Alexa or Google assistant.
- Page 11 Step 4 PREPARING DOOR SENSORS FOR INSTALLATION continued When installing the door sensors, make sure the arrow on the wired sensor (P) aligns to the arrow of the sensor magnet (Q) as close as possible. 3/4" (20mm) 2-3/8" (60mm) Foam pad The sensors need to be as close to level as possible.
- Page 12 Step 4 PREPARING DOOR SENSORS FOR INSTALLATION continued The interior assembly comes with the pre-in- For left swing doors, re-route the door stalled wired door sensor setup for a right sensor wire through the side channel. Pull swing doors with 2 ¾" (70mm) backset*. the foam pad then re-insert to secure the wire.
- Page 13 Step 5 INSTALLING THE INTERIOR ASSEMBLY (F) Plug the cable coming through mounting plate (D) into the interior assembly (F) as shown. Tuck cable under eyelet hooks and route to the right on interior assembly (F). Plug into , match red side of plug with red on socket - insert tightly.
- Page 14 Step 5 INSTALLING THE INTERIOR ASSEMBLY (F) continued Torque Blade Thumb turn shaft Align torque blade with thumb turn shaft, make sure both are in the vertical position. Before placing the interior Place the interior assembly Secure the interior assembly assembly onto the mounting against the mounting plate to mount platedoor with 2...
- Page 15 Step 6 INSTALLING BATTERIES PRESS & HOLD 1: With door open and deadbolt fully extended, place ribbon inside compartment and insert 4 batteries (note correct -/+ polarity). 2: After all batteries are installed, PRESS and HOLD the program button for 10S. The lock will auto- matically start self-check (release program button once check starts).
-
Page 16: Installing Batteries
Step 6 INSTALLING BATTERIES 3: Once self-check completes ensure the lock operates smoothly by manually locking and unlocking the door using the thumb turn on the interior assembly. The deadbolt should operate smoothly without any interference or binding. If necessary, repeat step 2 and ensure that (a) the deadbolt was extended and (b) the torque blade was inserted vertically while the deadbolt was extended. - Page 17 Step 7 INSTALLING THE DOORS SENSOR Make sure you have prepared the door sensors for installation, see step 4 LOCK SENSOR (P) Install on the interior side only. If necessary, trim tab from sensor (P) for doors with 2-3/8" (60mm) backset. Clean surface of door and doorframe, remove film from adhesive, attach and secure close to door edge as shown.
- Page 18 Step 7 INSTALLING THE DOORS SENSOR continued DOOR FRAME SENSOR (Q) Manually retract deadbolt and close door. Dry fit sensor (Q) to door frame and check for alignment. If needed, raise the height of the sensor to be more level with sensor (P) by adding 1 or 2 of the included adhesive foam pads.
- Page 19 Step 8 INSTALLING STRIKE PLATE Use the supplied door strike or use your existing as long as deadbolt operates smoothly without binding or catching. K(2X) IMPORTANT: because doors and frames vary in design it may be necessary to make slight adjustments to your strike plate and/or dust box in order to ensure smooth deadbolt operation.
- Page 20 Step 9 DOWNLOAD LOCKLY APP You have completed the Lockly physical lock installation. To enable live monitoring and voice control with Google Assistant or Amazon Alexa, you will need to setup the included Secure Link Wi-Fi hub and pair it with the Lockly Secure Pro deadbolt smart lock door sensors.
- Page 21 Step 10 SETTING UP THE SECURE LINK WI-FI HUB To set up your Lockly Secure Pro, choose an appropriate location for the Secure Link Wi-fi Hub for optimum performance (see below). For optimum connectivity, it is recommended that the hub be no further away from the lock than 30 feet (9 meters). During the setup process position yourself between the lock and the Secure Link Wi-Fi Hub—ideally no more than 30 feet (9 meters) apart.
- Page 22 Step 10 SECURE LINK WI-FI HUB SETUP continued Plug the Secure Link Wi-Fi Hub into the 5V 1A USB AC adapter and plug the AC adapter to your wall socket. GREEN LED indicator light will flash slowly to indicate that the Wi-Fi Hub is ready to connect.
- Page 23 Step 11 CONNECTING YOUR LOCKLY SECURE PRO The App will take you through the following steps, make sure the smart lock has been properly installed. You will need your activation card that is included in the box to proceed. ADD NEW DEVICE Select A Device Select Lockly Secure Pro GET STARTED...
- Page 24 Step 11 CONNECTING YOUR LOCKLY SECURE PRO continued Plug in your Secure Link Confirm lock password Password setting OK Set the Admin Code and Click "YES" 9:45 AM 100% AT&T 9:45 AM 100% AT&T 9:46 AM 100% AT&T AT&T 9:46 AM 100% Click “Yes”...
-
Page 25: Voice Control
Smart Home Ready VOICE CONTROL Hands-free voice control Control and check your status using only your voice with Amazon Alexa or Google Assistant-enabled devices. “Alexa, is my Front Door locked?” “Your Front Door is locked” To setup your lock to work with either voice assistant, download the Amazon Alexa or Google Home App and add a new Amazon Alexa Skill or Lockly Action... - Page 26 FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 27 L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2.
- Page 28 INSTALLATION OVERVIEW & PARTS LIST PM5 x 25mm Screw, Door thickness1-19/50"~1-69/100"(35~43mm) PM5 x 35mm Screw, Door thickness1-69/100"~1-97/100"(43~50mm) Battery Cover NOTE: You can either use M or O to stabilize the exterior part. O requires drilling Interior Assembly an extra hole. Use provided Template for drilling instructions if needed. Exterior PM5 Screw Adhesive...
- Page 29 Connect with us @meetlockly | #Lockly Reference installation parts overview foldout.
- Page 30 Total Access Solution For the most up to date version of this guide please visit: LocklyPRO.com/downloads We’re here to help! Email:prosales@Lockly.com © Copyright 2021 Lockly All rights reserved CHINA ZL 2013 1 0487970.4 | HONG KONG HK1194496 | EUROPE EP3 059689 B1 | AUSTRALIA 2013403169 RUSSIA RU2665222 |TAIWAN 621028 | KOREA10-1860096 | INDONESIA IDP000064051 | Other Patents Pending The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
Need help?
Do you have a question about the LOCKLY GUARD DEADBOLT 728W and is the answer not in the manual?
Questions and answers