Introduction - D-Link AirPlus DWL-810+ Owner's Manual

2. Introduction

The D-Link AirPlus DWL-810+ Ethernet-to-Wireless Bridge is a device that
can be implemented in a variety of ways to provide wireless access by
converting an Ethernet connection. For devices with a built-in Ethernet port,
the DWL-810+ provides a cost effective way to gain wireless connectivity,
virtually transforming wired devices into wireless units! Connect any
Ethernet-enabled device to an existing 802.11b wireless network using the
DWL-810+.
Typical applications include connecting a printer to a wireless network and
connecting Ethernet-enabled devices such as game consoles or set top
boxes to a Wireless Local Area Network (WLAN). Simply connect the DWL-
810+ to the Ethernet (RJ-45) port of a network device, such as a network
storage device, Internet camera, network printer, network scanner, or other
similar device. Using the DWL-810+ allows the flexibility of placing network
devices in remote locations while maintaining a high-speed connection.
You can use the convenient Setup Wizard for the easy installation of your
DWL-810+. Whether you are using it in Ad-Hoc mode or Infrastructure mode,
you can begin with the Setup Wizard. Please refer to the Quick Installation
Guide that is included with your purchase for instructions on how to use the
Setup Wizard.
This manual provides a quick introduction to wireless technology and its
application as it relates to networking. Please take a moment to read through
this manual if you need to get acquainted with wireless technology.
4