D-Link AirPlus DWL-810+ Owner's Manual page 21

How do I assign a Static IP Address in Macintosh OSX? (continued)
•
Select Built-in Ethernet in the Show pull-down menu
•
Select Manually in the
Configure pull-down menu.
•
Input the Static IP
Address, the Subnet
Mask and the Router IP
Address in the appropriate
fields.
•
Click Apply Now
3. The DWL-810+ Ethernet-to-Wireless Bridge Power light is not on.
•
Check to see if the DWL-810+ Ethernet-to-Wireless Bridge power
adapter is connected properly to a known good power outlet.
4. The DWL-810+ Ethernet-to-Wireless Bridge Link light is not on.
•
Make sure that the Ethernet cable is connected properly.
•
Make sure the AC power adapter is plugged in properly.
21