D-Link AirPlus DWL-810+ Owner's Manual page 22

Advanced Setup (optional)
For advanced setup features, enter
Internet browser and gain access to the web configuration of the
DWL-810+. The advanced setup features can be used to change the
LAN and wireless settings for your DWL-810+ Ethernet-to-Wireless
Bridge.
5. I cannot connect to another wireless client in Ad-Hoc mode.
•
The DWL-810+ Ethernet-to-Wireless Bridge has a default SSID of
default. Make sure that the SSID on the DWL-810+ Ethernet-to-
Wireless Bridge is exactly the same as the SSID on the other
wireless client.
•
The DWL-810+ Ethernet-to-Wireless Bridge has a default
channel of 6. Make sure that the channel on the DWL-810+
Ethernet-to-Wireless Bridge is exactly the same as the channel
on the other wireless client.
6. I cannot connect to an access point or wireless router.
•
Make sure that the SSID on the DWL-810+ is exactly the same
as the SSID on the Access Point or wireless router.
•
Move the DWL-810+ and Access Point or Wireless router into the
same room and then test the wireless connection.
•
Disable all security settings. (WEP, MAC Address Control, AES)
•
Turn off your Access Point and the device with the DWL-810+.
Turn on the Access Point, and then turn on the device with the
DWL-810+.
•
Make sure that the DWL-810+ is set to Infrastructure mode.
7. I forgot my encryption key.
•
Reset the Access Point to its factory default settings and restore
the DWL-810+ to its factory default settings. You may do this by
pressing the Reset button on the back of the unit. You will lose
the current configuration settings.
http://192.168.0.30
22
into your