Prorelax TENS + EMS SUPER DUO PLUS Operating Instructions Manual page 159

ELECTROMAGNETIC COMPATIBILITY
•The device complies with current specifications with regard to electromagnetic com
patibility and is suitable for use in all premises, including those designated for private
residential purposes. The radio frequency emissions of the device are extremely low and
in all probability do not cause any interference with other devices in the proximity.
• It is recommended that you do not place the device on top of or close to other electronic
devices. Should you notice any interference with other electrical devices, move the
device or connect it to a different socket.
• Radio equipment may affect the operation of this device.
INFELECTROMAGNETIC COMPATIBILITY INFORMATION
Guidance and manufacturer's declaration – electromagnetic emissions
The TENS+EMS SUPER DUO is intended for use in the electromagnetic environment
specified below. The customer or the user of the TENS+EMS SUPER DUO should assure
that it is used in such an environment.
Emissions Compliance
RF emissions Group 1
CISPR 11
RF emissions
Class B
CISPR 11
Harmonic
Not applicable
emissions
IEC 61000-
3-2
Voltage Not applicable
fluctua-
tions/ flicker
emissions IEC
61000-3-3
Technical Specifications
Electromagnetic environment-- guidance
The TENS+EMS SUPER DUO uses RF energy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
The TENS+EMS SUPER DUO is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public
low-voltage power supply network that supplies
buildings used for domestic purposes.
27