Selecting the program
The device offers 8 different preset treatment programs (P1~P8) respectively for
TENS /EMS modes ; P9 is self-programmable program by the user to desirable
pulse width between 50~260uS and frequency
at 2~60Hz (for TENS) and 7~70Hz (for EMS).
Choice of the appropriate mode
The mode you choose determines the kind of work that is imposed upon the
stimulated muscles. Choose the mode that is appropriate to your needs or gives
you the greatest pleasure.
For TENS programs:
When using any of the 8 programs for pain relief always start with the lowest
intensity and gradually increase the
level of intensity until you feel a "tingling" sensation. All programs are different
and therefore feel differently.
You may try all 8 programs in the beginning and choose one that feels pleasant.
Never increase the intensity to a level so that it hurts, always stay under the point
of discomfort. Start with short sessions of 5 or 10 minutes until your body gets
used to the stimulation.
Program
Pulse width (uS)
P1
P2
P3
P4
P5
P6
P7
P8
P9
All electrical specification ±20%
Selecting the program
260
260
260
260~156
260~156
260
260~156
50~ 260 uS
Pulse rate (Hz)
15
60
60
2~60
60
7~60
60
Recycle ( P1~P7)
2~60 Hz
18
Waveform Type
Constant
Burst
Constant
Dense-Disperese
Modulation Pulse Width
SD Pulse Rate
SD Pulse Width
Self programmable
Need help?
Do you have a question about the TENS + EMS SUPER DUO PLUS and is the answer not in the manual?