Unpacking Your Ice Maker; Connecting Your Ice Maker; Cleaning And Maintaining Your Ice Maker - HOMCOM HZB-12/C Manual

4. Allow one hour for the refrigerant fluid to settle before plugging the ice maker in.
5. The appliance must be positioned so that the plug is accessible.
WARNING: fill with potable water only. Only use drinking water.

CONNECTING YOUR ICE MAKER

* Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not
under any circumstances, cut or remove the third (ground) prong from the power
cord. Any questions concerning power and/or grounding should be directed toward a
certified electrician.
3. This appliance requires a standard 220-240Volt, 50Hz electrical outlet with good
grounding means.

CLEANING AND MAINTAINING YOUR ICE MAKER

Before using your ice maker, it is strongly recommended to clean it thoroughly.
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water by unplugging
the drain cap on front bottom side.
4. The outside of the ice maker should be cleaned regularly with a mild detergent
solution and warm water.
5. Dry the interior and exterior with a clean soft cloth.
6. When the machine is not to be used for a long time, drain water completely & dry the
interior.
DANGER
7