Inbound Filters - D-Link DIR-68 User Manual

Section  - Configuration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure
inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port
Forwarding, or Remote Administration features.
Name:
Enter a name for the inbound filter rule.
Action: Select Allow or Deny.
Enable:
Check to enable rule.
Remote IP Start:
Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Remote IP End:
Enter the ending IP address. Enter 55.55.55.55
if you do not want to specify and IP range.
Add: Click the Add button to apply your settings. You
must click Save. Settings at the top to save the
settings.
Inbound Filter This section will list any rules that are created. You
Rules List: may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon to
remove the rule.
D-Link DIR-68 User Manual

Inbound Filters

47