Firewall Settings; Spi; Nat Endpoint Filter; Anti-Spoof Check - D-Link DIR-68 User Manual

Section  - Configuration
A firewall protects your network from the outside world. The D-Link DIR-68 offers a firewall type functionality. The SPI feature
helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications.
If you choose to expose a computer, you cam enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen
computer completely to the outside world.
Enable SPI: SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps
to prevent cyber attacks by tracking more state per session. It validates that
the traffic passing through the session conforms to the protocol.
NAT Endpoint Select one of the following for TCP and UDP ports:
Filtering: Endpoint.Independent.- Any incoming traffic sent to an open port will be
forwarded to the application that opened the port. The port will close if idle
for 5 minutes.
Address. Restricted - Incoming traffic must match the IP address of the
outgoing connection.
Address.+.Port.Restriction - Incoming traffic must match the IP address and
port of the outgoing connection.

Anti-Spoof Check:

Enable this feature to protect your network from certain kinds of "spoofing"
attacks.
Enable DMZ: If an application has trouble working from behind the router, you can expose
one computer to the Internet and run the application on that computer.
Note: Placing a computer in the DMZ may expose that computer to a variety
of security risks. Use of this option is only recommended as a last resort.
DMZ IP Address: Specify the IP address of the computer on the LAN that you want to have
unrestricted Internet communication. If this computer obtains it's IP address
automatically using DHCP, be sure to make a static reservation on the Basic
> DHCP page so that the IP address of the DMZ machine does not change.
D-Link DIR-68 User Manual

Firewall Settings

48