Lifetime 6402 Assembly Instructions Manual

Lifetime 6402 Assembly Instructions Manual

Outdoor storage shed
Hide thumbs Also See for 6402:

Advertisement

Quick Links

OUTDOOR
STORAGE SHED
MODEL 6402
BEFORE ASSEMBLY:
• Assemble on a level surface
• At least 3 people recommended for setup
WATCH
3D ANIMATION
OF THE FULL ASSEMBLY
SCAN THE
CODE
TOOLS REQUIRED
QUESTIONS?
Dial 1-800-225-3865
7:00 am-5:00 pm (M-F) MST
and 9:00 am-1:00 pm (Sat) MST
OR WATCH THE HOW-TO ON YOUTUBE
OR SEARCH
1202276
Scan the code, or visit go.lifetime.com/6402-fullassembly
YouTube
®
and the YouTube logo are trademarks of Google, LLC.
CONTACT CUSTOMER SERVICE:
Live Chat: www.lifetime.com/customerservice
(Click on the tab "LIVE CHAT")
For Customer Service in mainland Europe:
E-mail: cs@lifetimeproducts.eu
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 3. Para el español, ver la página 2.
5/16" (8 mm) Wood Drill Bit
5/16" (8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
(both are needed when contacting us)
Model Number: 6402
Product ID:

TABLE OF CONTENTS

Icon Legend...............................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................15
Door Assembly..........................20
Floor Assembly..........................29
Wall Assembly..........................32
Shelving Installation..................38
Parts Identifi er..........................39
Door Installation.......................47
Roof Assembly..........................51
Window Installation...................61
Door Alignment........................64
Shed Anchoring........................67
Cleaning & Care........................71
Registration.........................72
Warranty.................................73

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6402 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lifetime 6402

  • Page 1: Table Of Contents

    OF THE FULL ASSEMBLY OR WATCH THE HOW-TO ON YOUTUBE SCAN THE OR SEARCH CODE 1202276 Scan the code, or visit go.lifetime.com/6402-fullassembly YouTube ® and the YouTube logo are trademarks of Google, LLC. TOOLS REQUIRED TABLE OF CONTENTS Icon Legend.......4 Warnings &...
  • Page 2 DE L'ASSEMBLAGE COMPLET OU REGARDER LA VIDÉO SUR YOUTUBE SCANNER LE OU CHERCHER CODE 1220276 Scanner le code, ou visiter go.lifetime.com/6402-fullassembly YouTube ® et le logotype YouTube sont des marques déposées de Google, LLC. OUTILS REQUIS SOMMAIRE Légende des ícônes......4 Avertissements et avis....5...
  • Page 3 LA ANIMACIÓN 3D DEL ENSAMBLAJE COMPLETO O MIRAR EL VIDEO EN YOUTUBE ESCANEAR EL O BUSCAR CÓDIGO 1220276 Escanear el código, o visitar go.lifetime.com/6402-fullassembly YouTube ® y el logotipo YouTube son marcas registradas de Google, LLC. INSTRUMENTAL REQUERIDO ÍNDICE Leyenda de íconos......4 Advertencias y avisos......5...
  • Page 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...
  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS / CONCRETO REQUERIDO 1.5 yd (1,15 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 96"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA RIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA...
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 2" x 4" x 148" (5,1 cm x 10,2 cm x 3,76 m) (x2) 2"...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 4" x 93 1/2" x 3/4" (10,2 cm x 2,38 m x 19,1 mm) (x1) 48"...
  • Page 11: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje DTK (x16) ADY (x16) ADJ (x8) ADK (x32) 11 9/16 in/po (≈29,4 cm) 11 9/16 in/po (≈29,4 cm) ADH (x4) AIP (x4)
  • Page 12 (DRS) como se muestra. escanear el código QR debajo para ver un video del ensamblaje. http://go.lifetime.com/8x12-5-section2 • Slide a Large Truss Brace (AFG) onto the Truss • Attach the Connector using the hardware indicated. Gutter Channels as shown, and align the holes.
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x16) ADK (x16) • Attatch the Large Truss Brace using the hardware included. Do not overtighten the Cap Nuts. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) (x2) ADJ (x8) 11 9/16 in/po (≈29,4 cm) 11 9/16 in/po (≈29,4 cm) ADH (x4) •...
  • Page 15: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADK (x2) ADW (x10) ADV (x6) ADZ (x6) CXK (x2) EYQ (x2) EYR (x2) AEE (x14) AHS (x2)
  • Page 16 • En cas de problème avec cette section, scanner le QR code en dessous pour voir une vidéo de l’assemblage. • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/8x12-5-section2 • Align the holes in the left (AGH) and right (AGI) rear gable halves.
  • Page 17 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADW (x5) AEE (x5) • Place the screen (AIQ) over the vent (ENH), and align the fi ve holes in the vent with those in the gable. •...
  • Page 18 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EYQ (x2) ADZ (x2) CXK (x2) ADW (x5) AEE (x7) AHS (x2) • Secure with the hardware included. Do not overtighten. •...
  • Page 19 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po ADK (x2) ADV (x6) EYR (x2) (≈10 mm) AEE (x2) • Align the holes in the header with those in the gable. •...
  • Page 20: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje AEE (x3) ADW (x3) ADJ (x2) ABU (x2) AHZ (x1) AHM (x2) AIA (x1)
  • Page 21 QR debajo para ver un video del ensamblaje. http://go.lifetime.com/8x12-5-section4 • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ). When the door handle is gently closed and latched, there should be a slight pressure sealing the doors and eliminating any gaps.
  • Page 22 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x2) DZG (x1) • Set the Deadbolts (AHM) down into the recesses at the top and bottom of the Door. Then, slide the Door End Channel (BLH) over the edge of the Door and the bottom of the Deadbolts as shown.
  • Page 23 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (11 mm) ADW (x3) ADJ (x2) ABU (x2) AHZ (x1) AEE (x3) AIA (x1) • Attach the Door Latch (AIA) to the Door using the hardware included. Do not overtighten. •...
  • Page 24 RIGHT DOOR ASSEMBLY / ENSAMBLE DE LA PUERTA DERECHA / ASSEMBLAGE DE LA PORTE DROITE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie / Bolsa de herraje * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section.
  • Page 25 • En cas de problème avec cette section, scanner le QR code en dessous pour voir une vidéo de l’assemblage. • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/8x12-5-section5 • Slide a hinge tube (CRD) down into the hole at the top of the right door (BDK).
  • Page 26 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIK (x1) AEE (x3) AIO (x1) ADW (x3) • Slide the thumb lever (AIO) down into the grooves •...
  • Page 27 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) ABV (x2) AIL (x1) AAB (x2) AHX (x1) ADB (x2) AEB (x2) AHV (x1) •...
  • Page 28 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x1) AHY (x1) AHW (x1) • Attach the bracket (AHW) using a screw (ADW), and attach the spring (AHY). •...
  • Page 29: Floor Assembly

    • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. CUW (x2) http://go.Lifetime.com/8x12-5-section6 CUD (x3) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO ADC (x1)
  • Page 30 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an Inner Floor Panel (CUD) at an angle, and • Attach another Inner Floor Panel (CUD) to the fi rst slide the tabs along the edge underneath an Outer Inner Floor Panel (CUD).
  • Page 31 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x24) AHO (x2) • Insert Bushings (AHO) through the holes in the Floor. The slit in the Bushing should face the front of the shed. •...
  • Page 32: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section. * No se utilizará...
  • Page 33 • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/8x12-5-section7 • Secure a wall support channel (AFM) at the middle of the notch on six (6) wall panels (AHD) using four (4) screws (ADZ) for each.
  • Page 34 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) • Secure two wall support channels (AFM) at the outer edges on the two (2) window •...
  • Page 35 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) • Slide the Panel to the left. • Faire glisser le panneau à gauche. •...
  • Page 36 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x35) • One at a time, insert the four tabs at the bottom of a Wall Panel (AHD) or Window Wall Panel (AHH) into the next four slots along the edge of the Floor.
  • Page 37 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x30) 7.10 • Insert these Wall Panels in the same way as the •...
  • Page 38: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x6) ADZ (x42) ADZ (x130)* ADZ (x8)* * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section.
  • Page 39: Parts Identifi Er

    PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) AFV (x1) EWA (x1) EVZ (x1) AGH (x1) AGI (x1) AGQ (x10) CUW (x2) CUD (x3)
  • Page 40 PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 50 9/16 in/po (≈1,28 m) DSR (x8) CONTENTS METAL KIT / CONTENU DU KIT DE PIÈCES EN MÉTAL CONTENIDO DEL KIT DE PIEZAS DE METAL 75 1/2 in/po (≈1,92 m) BLH (x2)
  • Page 41 PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 AFY (x4) AGL (x1) AGW (x1) AGY (x1) AGN (x1) AHD (x8) AHH (x2) CONTENTS OF SMALL PARTS BOX / CONTENU DE LA BOÎTE DE PETITES PIÈCES / CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS AGG (x1)
  • Page 42 PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENIDO DE LA CAJA 2 CONTENU DE LA BOÎTE 2 HARDWARE BAGS / SACS DE QUINCAILLERIE BOLSAS DE HERRAJE...
  • Page 43 • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/8x12-5-section8 • The right Wall/Shelf Support Channel (AFM) goes in the slot directly under the notch in the Wall Panel. The left Wall Support Channel goes in the slot to the right of the notch in the Wall Panel.
  • Page 44 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Insert the Shelf Brackets (AIY) into the slots in the Wall/Shelf Support Channels. The Brackets must be at the same height. •...
  • Page 45 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Insert two (2) Shelf Brackets (AIY) into the slots in the Wall/Shelf Support Channels. The Shelf Brackets must be at the same height.
  • Page 46 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Select the corner in which you would like to install a Corner Shelf (AFZ). Fold up the fl aps of the Shelf, and align the holes in the tabs with those in the Corner Wall Panel.
  • Page 47: Door Installation

    DOOR & ENTRY GABLE INSTALLATION / INSTALLATION DU TOIT À PIGNON ET LES PORTES / INSTALACIÓN DE LA FACHADA DE ENTRADA Y LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADX (x4) AHP (x2) AIC (x1)
  • Page 48 • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/8x12-5-section9 • Pull the Hinge Tube down out of the Door about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 49 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Slide the holes in the Entry Gable down over the two Hinge Tubes. • Faire glisser les trous dans le toit à pignon d’entrée sur les deux tubes. •...
  • Page 50 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) AIC (x1) AIM (x1) • Attach the Left (AIC) and Right (AIM) Gap Flaps to the corners of the Doors using the hardware included. These Flaps simply serve to block out light.
  • Page 51: Roof Assembly

    ROOF ASSEMBLY / MONTAGE DU TOIT / ENSAMBLE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADX (x30) AXX (x2) AED (x30) ADZ (x152) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 52 • En cas de problème avec cette section, scanner le QR code en dessous pour voir une vidéo de l’assemblage. • En caso de problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/8x12-5-section10 10.1 •...
  • Page 53 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.3 • Align the four holes in the Wall Panel with those at the bottom of the Roof Panel, and insert four (4) Screws (ADZ) to secure the Panel in place.
  • Page 54 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.4 • Insert the fi rst two Screws (ADZ) through the Gable and into the Roof Panel at the locations shown. Insert the Roof Support (AFL) into the notches in the Gable and between the Truss and the Roof Panel.
  • Page 55 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) 10.5 • Insert fi ve (5) more Screws (ADZ) to secure the Panel in place. •...
  • Page 56 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x60) 10.7 • Attach the next six Roof Panels in a similar way as the fi rst two. •...
  • Page 57 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 10.8 • Attach the Rear Gable to the shed using fourteen (14) Screws (ADZ). • Attacher le pignon arrière à l’abri à l’aide de quatorze (14) vis (ADZ). •...
  • Page 58 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x22) 10.9 • Attach the last two Roof Panels to the shed in the same way you did the fi rst two. •...
  • Page 59 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x34) 10.10 • Starting at the front, attach the Roof Caps to the shed using the hardware included. •...
  • Page 60 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x30) AXX (x2) AED (x30) 10.11 • Fold the Skylights (AHC), and attach them to the Roof using six (6) Screws (ADX) and Washers (AED) for each Skylight. •...
  • Page 61: Window Installation

    WINDOW PANE INSTALLATION / INSTALLATION DES CARREAUX / INSTALACIÓN DE LAS HOJAS DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIS (x4) ADZ (x8) ADY (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 62 • En caso de problemas con esta sección, carreau (AHE). escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/compactmodernshed-section2 11.2 11.3 • Insert a Screw (ADY) into the hole at the bottom of the • With the curved edge at the top and facing Window Pane.
  • Page 63 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) AIS (x4) 11.4 • Attach the two (2) Window Latches (ADY) at the top corners of the Panel opening. •...
  • Page 64: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Woode Parts / Pièces en bois / Piezas de madera AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 65 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) 12.1 • If the Doors are not level, follow the steps on this page or the next to even them out. •...
  • Page 66 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) 12.3 • If the Right Door is higher, insert a Shim (AIX) underneath the Bushing of the Hinge Tube of the Left Door until the Doors are the same height.
  • Page 67: Shed Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO 5/16" (8 mm) Wood Drill Bit 5/16 po (8 mm) Foret à...
  • Page 68 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) FOR CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO ANCHORING TO A CONCRETE PLATFORM L’ANCRAGE À UNE PLATE-FORME EN BÉTON EL ANCLAJE A UNA PLATAFORMA DE CONCRETO 5/16 in/po (8 mm) 13.1 •...
  • Page 69 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) FOR WOOD PLATFORM / POUR UNE PLATE-FORME EN BOIS / PARA UNA PLATAFORMA DE MADERA ANCHORING TO A WOOD PLATFORM L’ANCRAGE À UNE PLATE-FORME EN BOIS EL ANCLAJE A UNA PLATAFORMA DE MADERA 5/16 in/po (8 mm) 7/16 in/po (11 mm) 13.1...
  • Page 70 NOTES / REMARQUES / NOTAS...
  • Page 71: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 72: Registration

    à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 73: Warranty

    This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fi tness for use to extent permitted by Federal and state law. Neither Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
  • Page 74 à cette condition et aucun représentant de la société ne peut renoncer à l’application de cette politique ou la modifi er. Ce produit n’est pas destiné à des fi ns institutionnelles ou commerciales; Lifetime Products, Inc. n’assume aucune responsabilité à cet égard. Toute utilisation institutionnelle ou commerciale annule la garantie.
  • Page 75: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 76 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 De lunes hasta viernes 7:00 h–17:00 h Horario Éstandar de la Montaña (MST) y sábados 9:00 h–13:00 h (MST)

Table of Contents