Download
Share
Print this page
Lifetime 60358 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Outdoor Storage
  5. 60358
  6. Assembly instructions manual

Lifetime 60358 Assembly Instructions Manual

Outdoor shed
Hide thumbs Also See for 60358:

Advertisement

Quick Links

Download this manual
OUTDOOR
SHED
MODEL 60358
BEFORE ASSEMBLY:
• Assemble on a level surface
• At least 3 people recommended for setup
• Ensure all hardware and parts are included and free of
damage.
WATCH
FOR DOMESTIC USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED
(Not included—unless otherwise indicated*)
QUESTIONS?
Call: 1-800-225-3865
(English, French, Spanish)
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat:
www.lifetime.com/customerservice/home
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
ARA (x1)
1/8" (≈3 mm)
5/16" (≈8 mm) Wood Drill Bit
5/16" (≈8 mm) Masonry Drill Bit
For Customer Service in mainland
Europe and the United Kingdom:
E-mail: csinternational@lifetime.com
TABLE OF CONTENTS
Icon Legend..................................................................4
Warnings & Notices......................................................5
Platform Construction..................................................6
Truss Assembly...........................................................11
Gable Assembly..........................................................15
Door Assembly...........................................................23
Floor Assembly...........................................................37
Wall Assembly............................................................41
Parts Identifi er...........................................................i-iv
Shelving Installation...................................................50
Door & Gable Installation..........................................54
Roof Assembly...........................................................58
Wall Hook Installation................................................68
Window Pane Installation...........................................70
Door Alignment..........................................................73
Shed Anchoring..........................................................75
Cleaning & Care.........................................................79
Registration................................................80
Warranty......................................................81
Model Number: 60358
Product ID:

Advertisement

loading
Need help?

Need help?

Do you have a question about the 60358 and is the answer not in the manual?

Questions and answers

Oscar
June 3, 2025

You know how the walls go together in order by numbers like for instance agw is one of the corners

0
1 comments:
Mr. Anderson
August 14, 2025

To assemble the walls of the Lifetime 60358 shed in order:

1. Insert the tabs of the first wall panel into the cutouts in the floor.
2. Kick or tap the wall panel to the side so it locks into place.
3. Add the next two wall panels by inserting their tabs into the floor cutouts and sliding them to the right to lock into place. Ensure each new panel goes behind the previous one.
4. Align the holes and secure the panels with hardware.
5. Add the corner wall panel labeled AGW into the corner using the same method and secure it to the neighboring panel with hardware.
6. Continue adding two more wall panels the same way.
7. Add the second corner wall panel labeled AGL and secure it.

Corner panels like AGY, AGN, AGW, and AGL are placed at corners and secured with screws and support channels (AFM). The wall support channel is attached with screws (ADZ), with orientation depending on the panel.

This answer is automatically generated

0
Curtis Lauinger
March 22, 2025

what should the drill setting be at so you don't over tighten the screws?

0
1 comments:
Mr. Anderson
March 22, 2025

Use a drill with a low torque setting to avoid over-tightening screws.

This answer is automatically generated

0

Related Manuals for Lifetime 60358

Summary of Contents for Lifetime 60358

  • Page 1 5/16" (≈8 mm) Wood Drill Bit Shed Anchoring............75 Cleaning & Care............79 Registration..........80 5/16" (≈8 mm) Masonry Drill Bit Warranty............81 QUESTIONS? Model Number: 60358 CONTACT LIFETIME CUSTOMER SERVICE: Product ID: Call: 1-800-225-3865 For Customer Service in mainland Live Chat: Europe and the United Kingdom: www.lifetime.com/customerservice/home...
  • Page 2 Garantie..............82 5/16 po (≈8 mm) Mèche à maçonnerie N° de pièce : 60358 ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Pour les services à la clientèle du Composer le 1-800-225-3865 Entretien en direct: continent européen:...

  • Page 3: Table Of Contents

    Garantía.................836 5/16 in (≈8 mm) Broca de albañilería Número de pieza: 60358 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Chat en vivo: Llamar : 1-800-225-3865 Para el servicio a clientes en el www.lifetime.com/customerservice/home continente europeo: Correo electrónico:...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6 PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS / CONCRETO REQUERIDO 1 yd (≈0,77 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON / PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (≈10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 95 3/8"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS / MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS / PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 95 3/8” x 89 1/2” (≈2,42 m x ≈2,27 m).
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 2 in/po x 4 in/po x 88 3/16 in/po (≈5,1 cm x ≈10,2 cm x ≈2,24 m) (x2) 2 in/po x 4 in/po x 90 3/4 in/po (≈5,1 cm x ≈10,2 cm x ≈2,31 m) (x7) 16d 3 1/2 in/po (16d x ≈8,89 cm) (x28) 1.2.1...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 40 3/16 in/po x 93 3/4 in/po x 3/4 in/po 48 in/po x 93 3/4 in/po x 3/4 in/po (≈1,02 m x ≈2,38 m x ≈19,1 mm) (x1) (≈1,22 m x ≈2,38 m x ≈19,1 mm) (x1) 8d 2 1/2 in/po (8d ≈6,35 cm) (x48)
  • Page 11 TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO DTK (x8) ADY (x8) ADJ (x4) ADK (x16) Parts / Pièces / Piezas AIP (x2) ADH (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal / Piezas de metal 50 9/16 in/po (≈1,28 m) DSR (x4)
  • Page 12 • En cas d’avoir des problèmes avec cette section, scanner le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section2 • Slide a connector (AIP) onto the ends of two truss gutter channels (DSR) as shown.
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x8) ADK (x8) • Slide a truss brace (AFG) onto the truss gutter channels as shown, and align the holes. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) ADH (x2) ADJ (x4) • Slide a Truss Rod (ADH) through the holes in the Large Truss Brace and Connector. •...
  • Page 15 GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADV (x12) ADW (x10) ADZ (x6) AHS (x4) EYR (x2) CXK (x2) AEE (x14) EYQ (x2) ADK (x2) Parts / Pièces / Piezas AIQ (x2) ENH (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 16 • En cas d’avoir des problèmes avec cette section, scanner le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section3 • Align the holes in the left (AGH) and right (AGI) rear gable halves.
  • Page 17 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x5) AEE (x5) • Place the screen (AIQ) over the vent (ENH) and align the fi ve holes in the vent with those in the gable. •...
  • Page 18 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x2) • Insert an end cap (AHS) into each end of the square tube (AFE). •...
  • Page 19 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) • Secure with the hardware provided. • Fixer les uns aux autres en utilisant la quincaillerie incluse. •...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x2) EYQ (x2) ADW (x5) AEE (x7) CXK (x2) • Secure with the hardware included. •...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x2) 3.11 • Insert an end Cap (AHS) into each end of the header (EYS). •...
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADK (x2) EYR (x2) ADV (x6) AEE (x2) 3.13 • Secure with two (2) screws (EYR), two (2) washers (AEE), and two (2) nuts (ADK) ... •...
  • Page 23 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUIS / HERRAJE REQUERIDO Parts / Pièces / Piezas DGR (x1) ACH (x2) ADW (x1) AAB (x2) EOY (x1) BYZ (x2) ENO (x4) Lower / Inférieur / Inferior DGS (x1)
  • Page 24 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section4 • Slide a long tube (EDW) into the hole in the left door (BDJ) until a few inches remain out of the door. The end with the hole goes at the top.
  • Page 25 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 1/8 in/po (≈3 mm) ARA (x1) ACH (x2) AEB (x2) AAB (x2) • Attach the left latch bracket (EOY) to the door using the hardware included. Tighten only by hand at this point. •...
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ENO (x4) ENP (x2) • Attach the locks (DGS & DGR) and spacers (ENP) to the top and bottom of the left door. If the pins in the locks do not move freely, loosen the screws (ENO) just a tad.
  • Page 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) AEE (x3) • Attach the handle to the door using the hardware included. •...
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, left corner of the groove in the Left Door, lay the 1/8"...
  • Page 29 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 4.10 • Align the holes in the pane with those in the door, and gently set a window pane (DHN) down onto the door. •...
  • Page 30 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces / Piezas BBI (x1) BYZ (x2) ACH (x2) EPA (x1) EOZ (x1) EPC (x2) CHK (x1) ADW (x1) CXK (x2)
  • Page 31 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section5 • Slide a long tube (EDW) into the hole in the right door (BDK) until a few inches remain out of the door. The end with the hole goes at the top.
  • Page 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) EPC (x2) ACH (x2) 3/8 in/po CXK (x2) AEE (x2) AAB (x2) (≈10 mm) AEB (x2) •...
  • Page 33 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) AEE (x1) • Attach the handle as shown. Tighten securely. • Attacher bien la poignée comme illustré. Serrer bien la quincaillerie. •...
  • Page 34 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a hinge tube (CRD) into the hole in the door until a few inches remain out of the bottom. •...
  • Page 35 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each door. Starting at the top, right corner of the groove in the right door, lay the 1/8"...
  • Page 36 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Align the holes in the pane with those in the door, and gently set a window pane (DHN) down onto the door. •...

  • Page 37: Ensambl A J E Del Pi S O

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLAJE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADC (x1) AHL (x1) CWU (x18)* AHO (x2) • These are not anchoring screws. Their purpose is to fasten together the fl oor panels. •...
  • Page 38 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an inner fl oor panel (CUD) at an angle and slide the tabs along the edge underneath an outer fl oor panel (CUW). The tabs interlock.
  • Page 39 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • These are not anchoring screws. Their purpose is to fasten together the fl oor panels. • Ces vis ne sont pas les vis d’ancrage. Leur but est pour attacher les panneaux de plancher.
  • Page 40 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CWU (x2) AHL (x1) • Attach the strike plate (AHL) to the fl oor on the same side the bushings were installed. •...

  • Page 41: Ensambl A J E De L O S Muros

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLAJE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section. ADZ (x91)* ADV (x4) * No se utilizará...
  • Page 42 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section7 • Secure a wall support channel (AFM) to the fi ve (5) wall panels (AHD) just to the left of the notch at the top of the wall panels using four (4) screws (ADZ) for each.

  • Page 43: Identi F I C Ador De Pi E Zas

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) EVZ (x1) EWA (x1) AGQ (x6) AGH (x1) AGI (x1) CUW (x2) CUD (x1) AFV (x1)
  • Page 44 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT / CONTENU DU KIT DE PIÈCES EN MÉTAL CONTENIDO DEL KIT DE PIEZAS DE METAL 50 9/16 in/po (≈1,28 m) DSR (x4) 59 1/2 in/po (≈1,51 m) 59 1/2 in/po (1,51 m) EYS (x1) AFG (x2)
  • Page 45 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 AFY (117) (x2) AGW (x1) AGL (x1) AGY (x1) AGN (x1) AHD (x5) AHH (x1) CONTENTS OF SMALL PARTS KIT / CONTENU DU KIT PETITES PIÈCES CONTENIDO DEL KIT DE PIEZAS PEQUEÑAS...
  • Page 46 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS HARDWARE BAGS / SACS DE QUINCAILLERIE BOLSAS DE HERRAJE...
  • Page 47 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x4) • Secure the channel to the panel using four (4) screws (ADV). Note the angle of the screws. •...
  • Page 48 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Secure a wall support channel (AFM) to the corner wall panel (AGY) using four (4) screws (ADZ). The end with two holes goes at the top. •...
  • Page 49 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the two left-most tabs at the bottom of the corner panel (AGY) into the two right-most slots along the edge of the fl...
  • Page 50 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Bend the corner panel and snap the tabs in place. To help with insertion, place the block (AIW) under the fl oor panel directly under the tab being inserted.
  • Page 51 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 7.10 • Align the holes, and secure the panels together using fi ve (5) screws (ADZ) for each seam. Do not overtighten. The attachment points have a thin membrane that the screws will puncture.
  • Page 52 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 7.12 • Attach two wall panels (AHD) to the rear of the fl oor. Secure with screws (ADZ). •...
  • Page 53 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 7.14 • Attach two wall panels (AHD or AHH) to the left side of the shed using screws (ADZ). •...

  • Page 54: Instal A Ci Ó N De L A Estanterí A

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO GJZ (x4) FEX (x4) AIY (x2) ADZ (x16)* * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section. * No se utilizará...
  • Page 55 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIY (x2) FEX (x4) • Insert the shelf brackets (AIY) into the slots in the wall/shelf support channels. The brackets must be at the same height. •...
  • Page 56 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) • Attach a shelf support bracket (HDV) into the side wall at the same level the shelf brackets were placed. Repeat for the other shelf support bracket on the opposite side.
  • Page 57 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Attach the shelf (AFV) to the corner wall panels and shelf support brackets using eight (8) screws (ADZ). •...
  • Page 58 DOOR & ENTRY GABLE INSTALLATION / INSTALLATION DU PIGNON D’ENTRÉE ET DES PORTES / INSTALACIÓN DE LA FACHADA DE ENTRADA Y LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces / Piezas ADX (x4) AIC (x1) AIM (x1) AHP (x2) ADZ (x6)
  • Page 59 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section9 • Pull the Hinge Tube down out of the Door about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 60 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Slide the holes in the entry gable down over the two hinge tubes. •...
  • Page 61 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) • Attach the left (AIC) and right (AIM) gap fl aps to the corners of the doors using the hardware included. These fl aps simply serve to block out light.

  • Page 62: Ensambl A J E Del Tej A Do

    ROOF ASSEMBLY / MONTAGE DU TOIT / ENSAMBLAJE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADZ (x100)* ADX (x18) AED (x18) * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section. * No se utilizará...
  • Page 63 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. 10.1 http://go.Lifetime.com/outdoorstorageshed-section10 • Set a truss assembly into the notches on the fi rst two opposite wall panels. Set a roof panel (AGQ) onto the gable, wall panel, and truss assembly.
  • Page 64 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.3 • Align the four holes in the wall panel with those at the bottom of the roof panel, and insert four (4) screws (ADZ) to secure the panel in place.
  • Page 65 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.4 • Insert the fi rst two screws (ADZ) through the gable and into the roof panel at the locations shown. Insert the roof support (AFL) into the notches in the gable and between the truss and the roof panel.
  • Page 66 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) 10.5 • Insert fi ve (5) more screws (ADZ) to secure the panel in place. •...
  • Page 67 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.7 • Repeat the previous steps for the center roof panels but using ten (10) screws (ADZ) per panel. •...
  • Page 68 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 10.8 • Attach the rear gable to the shed using fourteen (14) screws (ADZ). •...
  • Page 69 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x22) 10.9 • Attach the last two roof panels to the shed in the same way you did the fi rst two. •...
  • Page 70 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x18) 10.10 • Starting at the front, attach the roof caps to the shed using the hardware included. •...
  • Page 71 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x18) AED (x18) 10.11 • Fold the skylights (AHC), and attach them to the roof using six (6) screws (ADX) and washers (AED) for each skylight. •...

  • Page 72: Instal A Ci Ó N De L O S Ganchos Mural E S

    WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS MURAUX / INSTALACIÓN DE LOS GANCHOS MURALES ACCESSORIES REQUIRED / ACCESSOIRES REQUIS / ACCESORIOS REQUERIDOS EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus —...
  • Page 73 • En cas d’avoir des problèmes avec cette section, scanner le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section11 11.1 •...
  • Page 74 WINDOW PANE INSTALLATION / INSTALLATION DU CARREAU / INSTALACIÓN DE LA HOJA DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces / Piezas AIS (x2) ADZ (x4) ADY (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique / Piezas de plástico AHE (x1) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 75 • En cas d’avoir des problèmes avec cette section, scanner le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. http://go.Lifetime.com/outdoorstorageshed-section12 12.1 •...
  • Page 76 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 12.4 • Attach the two (2) window latches (ADY) at the top corners of the panel opening. •...
  • Page 77 DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique / Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus —...
  • Page 78 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 13.1 • If the Doors are not level, follow the steps on this page to even them out. •...

  • Page 79: Ancl A J E De L A Caseta

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus — sauf indication contraire*) / (No incluido, salvo indicación contraria*) 5/16 in (≈8 mm) Wood Drill Bit Foret à...
  • Page 80 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) / SECCIÓN 14 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON / PARA UNA PLATAFORMA DE CONCRETO 7/16 in/po (≈11 mm) 5/16 in/po (≈8 mm) 14.1 • If you plan on anchoring your shed to a concrete platform, you must purchase the correct anchoring hardware. We recommend using a hammer drill, 5/16"...
  • Page 81 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) / SECCIÓN 14 (CONTINUACIÓN) FOR A WOOD PLATFORM / POUR UNE PLATE-FORME EN BOIS / PARA UNA PLATAFORMA DE MADERA 7/16 in/po (≈11 mm) 5/16 in/po (≈8 mm) 14.1 • If you plan on anchoring your shed to a wood platform, you must purchase the correct anchoring hardware. We recommend using a drill, 5/16"...
  • Page 82 NOTES / REMARQUES / NOTAS...

  • Page 83: Limpieza Y Cuidado

    ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 84 à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 85 THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE. Lifetime Lawn and Garden products are warranted to the original purchaser to be free from defects in material or imperfections that impair the use of the product. Defects resulting from misuse, abuse or negligence will void this warranty.
  • Page 86 Cette garantie n’est pas transférable et se limite expressément à la réparation ou au remplacement d’un produit défectueux. Si le produit est défectueux au sens de cette garantie, Lifetime Products, Inc. réparera ou remplacera les pièces défectueuses sans frais pour l’acheteur. Les frais d’expédition en partance ou en provenance de l’usine et les autres frais liés au retrait, à...
  • Page 87 NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 88 Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 www.lifetime.com 1231702_B 10/5/2023...