D-Link DI-704P User Manual page 10

5. PPTP
Just follow steps below to configure the PPTP WAN type:
Set My IP Address as the IP address that the ISP assigned to your PC,
e.g. 10.0.0.140.
Set My Subnet Mask as the mask that the ISP assigned to your PC, e.g.
255.255.255.0.
Set Server IP Address as the IP address of the DSL modem, e.g.
10.0.0.138.
Input the PPTP Account and Password.
Input the Connection ID if your ISP requires it.
Save the setting and restart the router.
In the Command prompt, type PING 4.0.0.1. If the reply is positive,
the router and your PC h ave been successfully configured for PPTP
WAN type.
-20-