Yamaha M7CL Upgrade Manual page 7

13.
Click the [Refresh] button in the "Settings" section.
The "EtherSound Devices" section will display information on the M7CL-48ES that you just restarted.
14.
Make sure that the firmware version displayed in the "EtherSound Devices" section matches the
firmware version to which you just updated.
If the version numbers do not match, the update operation may have failed. Try the update operation
again, starting from step 8.
15.
Click [Exit].
The ES-Firmware Updater will close.
The EtherSound module firmware update is now complete.
M7CL Upgrade Guide
Yamaha Corporation, All Rights Reserved.
© 2009-2010 Yamaha Corporation
D0
7