Infiniton FGC-236WC70DEK Manual page 44

Instructions for reversing the door
English
*** Some models use this type of door stops, please reverse them using the same method.
16. Install the refrigerator compartment door.
17. Remove the cover from the door pin hole at the top left of the refrigerator compartment door, then
move the door pin from the top right of the door to the top left of the door. Place the hole cover on the
hole in the pin hole at the top right-hand side of the door.
Passage hole cover
Door pin
Freezer door
18. Remove the hinge screw hole cover from the top left side of the refrigerator and install it on the top
right side of the refrigerator.
Hinge screw hole cover
19. Attach the top hinge to the top left side of the cabinet with the screws you removed earlier. Before
tightening the top hinge screws, make sure that the top of the door is flush with the cabinet and that the
rubber gasket makes a good seal.
20. Install the hinge cover over the hinge on the top left side of the refrigerator.
Hinge cover
Screws
Upper hinge
infiniton.es
44