Infiniton FGC-236WC70DEK Manual page 33

How to use
4. Food storage
After the refrigerator has operated for a period of time, the internal temperature of the refrigerator will be
automatically controlled according to the user's temperature setting. Once the refrigerator has cooled
down completely, place the food, which normally needs 2 to 3 hours to cool down completely. In sum-
mer, when the temperature is high, it takes more than 4 hours for the food to cool down completely (try
to open the refrigerator door as little as possible before the internal temperature drops).
Temperature setting
The temperature can be set by pressing the "SET" key. Each time the "SET" key is pressed, the indicator of
the current mode goes out while the indicator of the next mode lights up, validating that mode setting if
no operation is performed with the keys within 5s (otherwise, the mode setting will be invalid). Once the
setting takes effect, the temperature shall be immediately controlled according to the mode setting.
The cycles of the temperature modes are as follows:
"5-->4-->3-->2-->1-->FAST COOL-->5"
Freezer temperature control
The freezer temperature is adjusted by the temperature regula-
tor (as illustrated on the right) as follows:
When the temperature setting remains constant, turn the tem-
perature control switch clockwise so that the refrigerator tem-
perature decreases and the freezer temperature increases.
When the temperature setting does not change, turn the tem-
perature control switch counterclockwise so that the refrigerator
temperature increases while the freezer temperature decreases.
It is recommended to set the thermostat in the center position.
When you need a lower freezer temperature, turn the tempera-
ture controller correctly counterclockwise to reduce the freezer
temperature (note that the refrigerator temperature will increa-
se at the same time). When the temperature is the desired tem-
perature, be sure to turn the knob back to the center position at
your convenience.
The refrigerator thermostat and temperature controller should
be used together.
Coldest
2
4
5
6
8
Cold
It is used when the user needs the col-
dest temperature.
For normal use
Used when the user does not need a very
cold temperature.
33
English
infiniton.es