Page 1
Mounting and User Instructions Lotus-Prestige Series Stoves (Prestige, Prestige Basic, Prestige M, Prestige MST, Prestige S Prestige Magic, Prestige Magic 40) Version 1, 21/08-2017...
Page 3
Introduction Congratulations on your new Lotus Wood Stove We sincerely trust that your Lotus Wood Stove will bring many happy hours for you. However, to benefit fully from your investment, you should read these instructions thoroughly. They contain some specific advice on how to benefit fully from your stove –...
Page 4
Distance to Combustible Material For combustible material, such as combustible walls, furniture, etc., for reasons of safety a number of minimum distances apply. The following minimum distances apply: 150 mm behind 250 mm to the side 800 mm forward Distance to non-combustible material For non-combustible material, there should be a distance of 80-100 mm in order that the stove may release and distribute the heat while you may clean on and around the stove.
Smoke Control Areas UK Clean Air Act 1993 The Lotus Prestige stove has been exempted under Section 21 of the Clean Air Act 1993 for use in Smoke Control Areas when burning wood logs. Chimney A good draught in your chimney is paramount to how well a stove will burn.
Floor When placing your new Lotus stove on the floor, it should be placed on a non- combustible plate, for instance of steel or stone material. The plate should be so large that it will reach a minimum of 30 cm in front of the stove, and 15 cm at each side of the fireplace opening.
Chimney Sweep When your new stove has been mounted, do remember to report the installation to the chimney sweep. For one thing, the installation will have to be inspected, and the chimney should also be cleaned by the chimney sweep in the time ahead.
Cleaning of Stove All Lotus stoves have been factory surface treated with original Senotherm lacquer in ”coke” or ”grey” colour. Due to this treatment, the stove will, during the first kindlings, exude a special odour but that will vanish after a few times.
Your stove should also be cleaned inside regularly. Ashes, soot, and any tar residues are to be removed from pane and combustion chamber. Smoke baffle plates should be dismantled regularly to remove soot and dirt which will frequently settle behind the plates. Check at the same time whether there is free passage to the chimney.
Wood for your Lotus stove should have a diameter of 7-9 cm and be max. appr. 30 cm long as it will otherwise come too close to the stove sides (at the DS testing 25 cm long wood has been used).
Operating Trouble In case of any operating trouble with your Lotus stove, you may find the cause of that below. If not, please do not hesitate to contact your Lotus distributor. Stove hard to control – burning too quickly If your stove is new, check our guide.
WARRANTY Lotus Wood Stove – 10-Year Warranty From 1 September 2014, Lotus is offering a 10-year warranty instead of a five-year warranty. This warranty applies to stoves which are supplied by Lotus after this date. This warranty covers Lotus Wood Stove model _________ production no.
EC Declaration of Conformity Manucfacturer: Lotus heating Systems A/S Agertoften 6, 5550 Langeskov Denmark _________________________ Product: Stove fired by solid fuel Type designation: Lotus Standard: EN 13240:2001/A2:2004/AC:2007 Fuels: Wood logs ___________________________ Manufacturer’s declaration: The stoves are approved by RRF Rhein-Ruhr feuerstätten Prüfstelle D- 45307 Essen (NB 1625).
Page 15
Product Fiche Name or trademark Lotus Notes Model identifier Prestige series Energy efficiency class Direct heat output 5,0 kW -meaning the space heat output according to the product standard -rounded to the nearest one decimal place Energy efficiency index -rounded to the nearest integer:...
Need help?
Do you have a question about the Prestige Series and is the answer not in the manual?
Questions and answers