Static Nat - D-Link DI-1162M User Manual

DI-1162/DI-1162M Remote Access Router
All of the parameters are the same as in Dynamic NAT, except the Global IP is a solitary, global address.
Global IP – this is a single, globally unique IP Address of the global interface (the interface to which it is
assigned, in this case, one of the WAN interfaces) that is valid on the Internet.

Static NAT

This screen (below) is how the NAT IP Pool appears, if Static NAT was chosen for the Translation Mode
parameter. Each entry in this configuration is used to map a single global IP address a single local IP address.
78