Dial-In User Profile - D-Link DI-1162M User Manual

The parameters are described below:
Dial Retry Time – This is the time (in seconds) the router will wait before the next dial attempt.
Dial Retry Count – This is the specified maximum number of dial attempts the router will make when trying
to establish a connection on this interface.
Call Back Delay – This is the time (in seconds) the router will wait before calling the number designated for a
specified dial-in user.

Dial-In User Profile

The Dial-In User Profile is used to configure the DI-1162/DI-1162M for single users (for example a person
working at home) to dial in to the router and gain access to the network. At least one User Profile must be
configured for each user who will dial in (in conjunction with Dial Configuration settings). Please note that WAN
connections to computers on other networks must be defined in the Remote Network Profile submenu.
Up to eight users can be set up to dial in to the router. However, more dial-in users can be accommodated by using
a RADIUS server as described in the RADIUS Configuration section of this manual.
The Dial-In User Profile submenu appears below:
49
DI-1162/DI-1162M Remote Access Router