Table of Contents
Advertisement
Termination IP
Domain Name
Peer ID Type
this VPN tunnel will connect with using this
drop-down menu.
Static IP address
allows you to specify the IP
te end of the VPN tunnel −
address of the remo
assuming that this IP address does not change
(is statically assigned by the rem
Domain Name allows you to specify the
domain name of the remote end of the VPN
tunnel. This requires that the designated DNS
server for the DFL-600 be
specified domain name in
Dynamic IP address
allows you to specify that
the remote end of the VPN tunnel is assigned an
IP address using DHCP.
remote end of an IPSec VPN tunnel uses a
dynamically assigned IP address, this end m
have a statically assigned IP address. That is,
both ends of an IPSec VPN tunnel cannot have
a dynamically assigned IP address.
The IP address of the remote gateway. If you
choose Static IP address
menu above, you mu
st enter the IP address of
the remote end of the IPSec VPN tunnel here.
The domain name of the remo
you choose Domain Name
menu above, you mu
st enter the domain name
of the remote end of the IPSec VPN tunnel
here.
This drop-down menu allows you to specify the
type of authorization key
Address(IPV4_Addr) − This allows you to
specify that the IP address of the remote end of
the IPSec VPN tunnel will be used to identify
and authenticate the remote host.
ote peer's ISP).
able to resolve the
to an IP address.
Please note that if the
ust
in the drop-down
te gateway. If
in the drop-down
Advertisement
Table of Contents
