Table of Contents
Advertisement
Rip Version
RIP Enabled
Interface
Your DFL-600 can automatically discover routes
to destinations on both your LAN and the WAN
(Internet). You can choose either RIP1, RIP2 or
None. RIP2 (Routing Information Protocol
version 2) adds support for variable-length
subnet masks, and is generally the best choice.
Choosing None will disable the routing function
of your router, as will choosing Disabled for the
WAN or LAN RIP interface.
These two click boxes allow you to enable or
disable RIP for either the LAN or WAN
interface. Choosing Disabled for the WAN or
Advertisement
Table of Contents
