Etac Molift Raiser Pro Quick Manual page 4

Handling
Warnings
01. The wheels must always be locked when the user
moves between sitting and standing position.
02. Pull release wire and slide the leg support to
correct height. Make sure both sides are properly
settled. Push up or down until you get the auditive
feedback click. Unattached leg support can cause
the leg support to slide down and make the device
unsafe to use.
03. Make sure the leg support is vertical and the
release wire is pointing towards carer's side before
the user stands up.
04. The carer must always place one foot on the
baseplate and counterbalance the user's weight
when the user stands up or sits down.
05. Make sure the user's weight is centred above the
centre of the base plate.
06. The user should always hold on to the handles
during transfer.
Information
01. Feet must be placed on the contour on the
baseplate.
02. Adjust the legsupport, so it is placed two fingers
below the user's knees.
This is a Quick Guide. The latest version of all user manuals can be downloaded as a
"pdf-file" from the www.etac.com
Etac A/S
Parallelvej 3
DK-8751 Gedved
Technical data
10,7kg
23.6lbs
Cleaning
+45 796 858 33
patienthandling@etac.com
www.etac.com
70
10