[Insert Date] Setting To Write The Date In The Image - Kyocera Finecam L4v Instruction Manual

Using Setup "SET UP" Mode Functions
[INSERT DATE] Setting to Write the Date in the
Image
Use this function if you want the date to be written in the image. Once the function is
set to [WITH DATE], the date is written in images when shooting.
[WITH DATE] The date is written in images when shooting.
[NO DATE] The date is not written.
(default)
e The date is written on the right bottom cor-
ner of the image.
2003.08.15
e Once the date is written on an image, you cannot erase the date.
Operation — setting to [WITH DATE]
1 Turn on the power and set the mode select dial to "SET UP".
2 Press Up or Down on the directional keypad to
select [INSERT DATE], then press Right on the
SET _UP(1/3)
a
directional keypad. BRIGHT CNTRL STANDARD
R S E R E D R T E N O Dare
3 Press Up on the directional keypad to select [WITH ae
POWER SAVE _3MIN
DATE], then press the 4 button to complete the '
setting.
@ When the function is set to [WITH DATE], the date is always dis-
played on the LCD monitor when shooting.
2003.08.15
_ SETUP