"Tuning The Pow Oe Ids Essnttesepecstontenateasseusnibsscadsosdovousdeevaeeauye; E Battery Indicator And Replacing Time; Cece Seeeeseeeseeeseeeteeeeeeesseeseeenaes; Setting Thé Date And Vim Wets Sicceisstecticestetcuecctisactes Evivesssecseacdeceastenceececteest - Kyocera Finecam L4v Instruction Manual

elawie)
J0 uoneiedaig
Preparation of Camera
2 Turning the Power ON
Press the POWER button.
@ The picture you take with this camera can be set
as the startup screen. (page 88)
E Battery indicator and replacing time
Fully Half Remaining The camera cannot
charged consumed power is low. be operated.
Replace the Replace the battery
battery pack pack.
soon.
3 Setting the Date and Time
If the camera has been left for a long time without a battery pack, the date and time will be
reset. When you replace the battery pack with a new one, make sure that the date and time
are correct.
1 Set the mode select dial to
"SET UP".
The setup menu is displayed.
= m
aC OA
SET UP(1/3)
2 Set the date and time.
@ Press Down on the directional keypad to
select [DATE], then press Right on the
directional keypad.
© Use the directional keypad to set the
date and time.
e Press Left or Right on the directional
keypad to move the cursor to Year =
Month = Day = Hour = Minute =
Display format*.
e Press Up or Down on the directional
keypad to change each value and the
display format.
For Display format of date, see
page 17.
DATE/TIME ADJUSTMENT
a
2003.01.01 00:00
v
Y.M.D
4 OK
MENU CANCEL
kyocera
16