Kyocera Finecam L4v Instruction Manual page 94

94
Appendix
Messages and Remedies
WEEE Te [2
"MEMORY CARD FULL"
The memory card has
insufficient free memory
available.
"NO CARD" No memory card is loaded.
Insert a new memory card, or
erase unneeded images on the
current card.
Or, change the setting of image
size or quality.
Insert a memory card.
"WRITE PROTECT" The write protect switch is
activated (SD memory card).
Release the write protect
switch, or insert a different
memory card. (page 15)
The inserted memory card has
been formatted in a different
camera or information device.
"CARD ERROR" The memory card format is not
compatible with the camera.
Memory card is not loaded
correctly.
Reformat the memory card in
the camera. (page 84)
Insert another memory card or
format it.
Remove the memory card and
reload it correctly.
Nothing is recorded on the
memory card.
"NO IMAGE"
e Insert a memory card with
recorded image data.
© Take a picture.
Printing is cancelled from the
CANCEL PRINT, printer or camera.
Start printing from the camera
when the printer is starting or
operating.
"PRINTER BUSY"
Printer has any trouble, such as
ink shortage or paper jam.
"PRINTER ERROR"
Return the menu of [Direct
Print] by selecting [Check] or
[Cancel].
If you restart printing, check the
status of the printer or the
camera.
If you cannot print the images,
turn off the powers of the
camera and the printer once
and turn on them. After that,
restart printing.
It appears when the image is
broken or the image was
restored in the PC.
"NO PLAYBACK"
Take a picture again.