Auto Operation - Haier HSM09HRA03/R2 - annexe 1 Operating Manual

Operation

Auto Operation

Remote controller
4
POWER/SOFT
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
AUTO
Then
Select Auto operation
3.Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
Remote controller:
LOW
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
4.Unit stop
Press ON/OFF button, the unit stops.
About Auto Operation
Under the mode of auto operation, air conditioner will
automatically select Cool or Heat operation
according
to room temperature.
9
COOL DRY FAN HEAT
MED HI AUTO