Assembly And Installation - Haier HPR99XC5 Manual

Table of Contents

Advertisement

English

Assembly and Installation

USING WINDOW PANEL KIT
1. Plastic panel - 2 pieces
2. Window Panel Adaptor - 1 piece
3. Screws - 4 pieces
1. Adjust the Plastic Panel to the width or height of your window and tighten
the 2 screws that are attached to the panel.
2. Push the round Window Panel Adapter through the rear of the Plastic Panel.
Line up the holes and tighten the Adapter with 4 screws that are included in
the kit. (Tighten screws from the front).
3. Install the Window Plastic Panel into the window. If necessary use duct tape
to better secure the panel.
4. Connect exhaust hose to the unit by inserting the narrower side of the Unit
Adapter that is attached to the hose into the exhaust. Turn Adapter clockwise
until it locks. (See Illustration A)
5. Move the unit to the window, extend the hose and attach the other end of the
hose to the window. Align the tabs on the hose and window panel adapters
and fasten them together.
Window Adapter
(6)
1
2
Exhuast Hose
3
A
B
Unit Adapter

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HPR99XC5 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Hpr99xc5-c

Table of Contents