Output Connections - Pioneer DJM-707 Operating Instructions Manual

CONNECTIONS
2. Connecting Headphones (front panel)
Headphones 5
Use to connect headphones with a 6.3 mm diameter stereo
plug.

3. Output Connections

Power amplifier
(supporting RCA input)
8
9
Power amplifier
(for booth monitor)
To SESSION IN jacks of other mixer
External effector 6
Use a 6.3 mm monaural plug to connect the external
effector's input connectors to the DJ mixer's SEND jacks.
When using an effector with a monaural input, connect it to
the L channel output only. The signal actually sent to the
effector will represent a mix of L and R signals.
Use a 6.3 mm monaural plug to connect the external effector's
output connectors to the DJ mixer's RETURN jacks.
When using an effector with monaural output, connect only
the L channel input. The signal received from the effector will
be input to both L and R channels.
Master output
MASTER 1 7
XLR type balanced output.
6
<DRB1353>
FADER REVERSE
CH-1 C.F. CH-2
ON ON ON
OFF OFF OFF
CH-1 CROSS FADER 1
6
L
CH-2
R
R L
CD
R
MASTER 2
PHONO
R L
/ LINE
R
PHONO
SIGNAL LINE
GND
L
CH-2 PLAYER
BOOTH/
CONTROL
SESSION OUT
R
p
Power cord
Power outlet
FADER START
C.F. 1 CH-1 C.F. 2 CH-2
PROFESSIONAL 2CHANNEL MIXER
DJM-707
FADER CURVE
CROSS FADER 2 CH-2
FADER CUT LAG
MIN MAX
SEND RETURN CH-1 MIC
L R L
R L
CD
(MONO) (MONO)
MASTER 1
R
PHONO
/ LINE PHONO
3 COLD
1 GND
SIGNAL LINE
GND
R
2 HOT L CH-1 PLAYER
CONTROL
7
L
MASTER 2 8
RCA type unbalanced output.
BOOTH/SESSION OUT 9
These jacks are provided for booth monitor output.
The sound volume here is controlled by the booth monitor
level dial, regardless of the setting of the MASTER LEVEL
dial.
When using this unit in tandem with another mixer, connect
these jacks to the other mixer's session input connectors.
Power cord p
After completing all other connections, connect the power
plug to a standard power outlet or to the auxiliary power
outlet of an amplifier.
Headphones
PHONES
5
POWER
External effector
L
SESSION IN
Power amplifier
(supporting XLR input)