This device contains 23. Your Shark® vacuum may not 12. DO NOT use without filters in place. electrical connections, electrical be designed to stand up on its own.
ASSEMBLY ASSEMBLY (Click) (Click) (Click) (Click) (Click) POWER CORD 1. Insert the Wand into the Pod. 2. Insert the Handle into the top of the wand. 3. Connect the Hose to the back of the pod. 4. Insert the C-clip into the back of the pod. 5.
Page 4
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER/SURFACE SWITCH UPRIGHT MODE SUCTION CONTROL Select surface setting: The Suction Control Slider located on the To engage Brushroll, turn on the power, step handle allows you to adjust the suction on the floor nozzle, and tilt handle back. O Off depending on the floor type.
EMPTYING THE DUST CUP CLEANING AND REPLACING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING FILTERS Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line. Regularly rinse and replace the filters to maintain your vacuum's suction power.
MAINTENANCE CHECKING FOR BLOCKAGES CLEANING THE BRUSHROLL HOSE BLOCKAGES WAND BLOCKAGES Detach hose from vacuum pod, Detach wand from pod and handle, and check hose and opening on and check both ends for blockages. Using a coin, turn locks counterclockwise, then lift the cover to access brushroll. back of pod for blockages.
AVAILABLE ACCESSORIES TROUBLESHOOTING Power cord caught in brushroll or floor nozzle. Crevice Tool • To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. This slender tool offers extended reach to If this occurs, immediately shut off power to the vacuum and remove the cord from the access corners, baseboards, tight spaces, brushroll or nozzle.
REGISTER YOUR PURCHASE Benefits of registering your product and FIVE (5) YEAR LIMITED WARRANTY creating an account: registeryourshark.com • Get easier, faster product support and The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja access to warranty information Scan QR code using Operating LLC.
Need help?
Do you have a question about the NV181 and is the answer not in the manual?
Questions and answers