D-Link DWL-120 Manual page 17

Using the Configuration Utility
Network Type:
Select Infrastructure or
Ad-Hoc
SSID:
All devices on the network must
share the same SSID to be able
to communicate
TxRate:
Choose the data rate speed
WEP:
Choose Enable or Disable. Disable is the default setting. If you enable
WEP, you must Enable WEP on all devices on the network, in order to
communicate.
Advanced Setting:
Click to access Advanced
configuration
Click OK if you have made any changes
Site Survey
View all the devices in the network from the Site Survey tab.
Edit/Create new profile
WEP Setting:
Click to configure the WEP setting
17