Download Print this page

D-link DWL-120 Quick Install Manual

128-bit driver upgrade.
Hide thumbs
   

Advertisement

DWL-120 Driver Upgrade Procedure
Preparation for Upgrade
• Make sure that the DWL-120 is rev. 1A. The 128-bit upgrade
requires the rev. 1A version of the DWL-120, and will not work with
prior versions of the hardware because of chipset limitations.
• Download the DWL120_DRIVERS_v225.02.zip from
http://support.dlink.com/
• Unzip DWL120_DRIVERS_v225.02.zip into a folder on the
computer's hard drive such as c:\DWL-120.
• Make sure that the DWL-120 is connected to the USB port and the
drivers are already installed in the computer.
NOTE: If the DWL-120 drivers have not been installed in the
computer, please refer to the quick installation guide for the proper
installation procedure.
to a local directory such as c:\temp.
1

Advertisement

   Also See for D-link DWL-120

   Related Manuals for D-link DWL-120

   Summary of Contents for D-link DWL-120

  • Page 1

    • Unzip DWL120_DRIVERS_v225.02.zip into a folder on the computer’s hard drive such as c:\DWL-120. • Make sure that the DWL-120 is connected to the USB port and the drivers are already installed in the computer. NOTE: If the DWL-120 drivers have not been installed in the computer, please refer to the quick installation guide for the proper installation procedure.

  • Page 2

    Updating the Drivers for Win 98/ME Click on Start → select Settings → click on Control Panel → double click on System → select the Device Manager Tab Select the “D-LINK DWL-120 WIRELESS USB ADAPTER” in Network adapters Click on Properties Select the Driver Tab Click on Update Driver…...

  • Page 3

    Updating the Drivers Continued… Click Next Select “Search for a better driver … (Recommended)” Click Next Select “Specify a location” Click on Browse and select the folder where the drivers were unzipped i.e. C:\DWL-120 Click Next...

  • Page 4

    Updating the Drivers Continued… Click Next Click Finish...

  • Page 5

    Updating the Drivers for Win 2000 Click on Start → select Settings → click on Control Panel → double click on System → select Hardware tab → select the Device Manager Select the “D-LINK DWL-120 WIRELESS USB ADAPTER” in Network adapters and Double Click Select the Driver Tab Click on Update Driver…...

  • Page 6

    Updating the Drivers Continued… Click Next Select “Search for a better driver … (Recommended)” Click Next...

  • Page 7

    Updating the Drivers Continued… Select “Specify a location” Click Next Click on Browse and select the folder where the drivers were unzipped i.e. C:\DWL-120 Click Next...

  • Page 8

    Updating the Drivers Continued… Click OK Click Finish...

  • Page 9

    ® D-Link Building Networks For People...

Comments to this Manuals

Symbols: 0
Latest comments: