DWL-120 11 Mbps Wireless USB Adapter Installing the Drivers Installing the Drivers Note: Please do not connect the DWL-120 wireless USB adapter until advised to do so. With the computer turned ON, insert the driver CD for the DWL-120 wireless USB adapter into the CD-ROM.
Click Next, on the following screen. When the following screen is displayed, Click Next. Windows will finish loading system files. Finishing Installation Finishing Installation Insert the DWL-120 wireless USB adapter into an available USB port. Rev:dwl-120.01-22-01.9am...
Click Next. Windows will load the drivers from the DWL-120 driver CD and copy system files. Note: If Windows is unable to find the drivers, refer to Appendix A for browsing the CD-ROM drive. At the following screen, Click Finish.
For instructions on configuration, please see your User’s Manual. APPENDIX APPENDIX Providing Driver Files Providing Driver Files If prompted for the driver files, insert the driver CD. Click Browse. Select the CD-ROM drive. Click OK. Windows will copy the necessary files.