Dhcp Configuration - D-Link DSL-360T User Manual

DHCP Configuration

Use the DHCP Configuration window to configure the Modem to act as a DHCP server for the LAN.
Configure LAN DHCP services by defining the following parameters:
Start IP
End IP
Lease Time
DSL-360T ADSL Modem User's Guide
Figure 4-1. Setup – DHCP Configuration window
Type in the base address for the IP pool of unassigned IP addresses.
Type in the last address of the contiguous IP address range to be used by
the Modem for DHCP function.
This specifies the amount of time (in seconds) a client can lease an IP
address, from the dynamically allocated IP pool.
26