AEG ProLine FSK94847P User Manual
AEG ProLine FSK94847P User Manual

AEG ProLine FSK94847P User Manual

Hide thumbs Also See for ProLine FSK94847P:

Advertisement

Quick Links

FSK94847P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProLine FSK94847P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AEG ProLine FSK94847P

  • Page 1 FSK94847P User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    14. ENVIRONMENTAL CONCERNS..............30 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.05 (0.5) / 1 (10) MPa (bar). Follow the maximum number of 14 place settings. • The appliance door should not be left in an open • position to avoid the tripping hazard.
  • Page 5 ENGLISH 2.4 Use • Do not use multi-plug adapters and extension cables. • Do not put flammable products or • Make sure not to cause damage to items that are wet with flammable the mains plug and to the mains products in, near or on the appliance.
  • Page 6: Installation

    1240 3.1 Building in www.youtube.com/electrolux www.youtube.com/aeg 3.2 Safety caps How to install your AEG/Electrolux If the furniture panel is not installed, open 60 cm Sliding Door Dishwasher the appliance door carefully to avoid the risk of injury. After installation, make sure the plastic covers are locked in position.
  • Page 7: Product Description

    ENGLISH 5 mm 4. PRODUCT DESCRIPTION Ceiling spray arm Air vent Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters ComfortLift basket Rating plate Trigger handle Salt container Lower basket handle...
  • Page 8: Control Panel

    Upper basket Cutlery drawer 4.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy.
  • Page 9: Programme Selection

    ENGLISH Indicator Description Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use". Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator.
  • Page 10 ExtraPower GlassCare ExtraPower improves the GlassCare prevents delicate load, dishwashing results of the selected glassware in particular, from damaging. programme. The option increases the The option prevents rapid changes in the wash temperature and duration. dishwashing temperature of the selected programme and reduces it to 45 °C.
  • Page 11: Basic Settings

    ENGLISH Pro‐ Dishwasher Degree of Programme phases EXTRAS gramme load soil Machine For cleaning the appliance • Cleaning 70 °C Not applicable Care interior. Refer to "Care and • Intermediate rinse Cleaning". • Final rinse • AirDry 1) Automatic door opening during the drying phase. Refer to "Basic settings". Consumption values Water (l) Energy (kWh)
  • Page 12 Settings Values Description Auto door open ON (default) Activate or deactivate AirDry. Key tones ON (default) Activate or deactivate the sound of the but‐ tons when pressed. Latest prog. selec‐ Enable or disable the automatic selection of tion OFF (default) the most recently used programme and op‐...
  • Page 13 ENGLISH • The new setting is saved. a negative effect on the washing results • The appliance returns to the basic and on the appliance. settings list. The higher the content of these minerals, 5. Press and hold simultaneously the harder your water is. Water hardness for about 3 is measured in equivalent scales.
  • Page 14 All the consumption values Water softener lev‐ Amount of water mentioned in this section are determined in line with the currently applicable standard in laboratory conditions with water hardness 2.5mmol/L (water softener: level 3) according to the regulation: 2019/2022 .
  • Page 15: Before First Use

    ENGLISH When the latest programme selection is disabled, the default programme is ECO. 7.7 TimeBeam AirDry is automatically activated with all programmes. The duration of the drying phase and the TimeBeam displays the following door opening time vary depending on the information on the floor below the selected programme and options.
  • Page 16 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes.
  • Page 17: Daily Use

    ENGLISH 3. Remove the spilled rinse aid with an Fill the rinse aid dispenser absorbent cloth to prevent excessive when the indicator (A) is foam formation. clear. 4. Close the lid. Make sure that the lid locks into position. 9. DAILY USE 1.
  • Page 18 9.2 Using the detergent 9.3 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The light related to the selected programme is on.
  • Page 19 ENGLISH • The light related to the button is If the door is opened for more than 30 seconds • The display shows the longest during the drying phase, the possible program duration. running programme ends. It 2. Close the appliance door to start the does not happen if the door program.
  • Page 20: Hints And Tips

    10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment.
  • Page 21: Care And Cleaning

    ENGLISH 4. When the programme is completed, • Do not wash in the appliance items adjust the water softener according that can absorb water (sponges, to the water hardness in your area. household cloths). 5. Adjust the released quantity of rinse •...
  • Page 22 CAUTION! interior. If unable to remove the foreign objects, contact an How to start the Machine Authorised Service Centre. Care programme 1. Disassemble the filters system as Before starting the Machine instructed in this chapter.
  • Page 23 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). CAUTION! An incorrect position of the filters can cause bad washing results and damage 4.
  • Page 24 3. To install the spray arm back, press it downwards. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.
  • Page 25: Troubleshooting

    ENGLISH element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
  • Page 26 Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 27 ENGLISH Problem and alarm code Possible cause and solution Technical malfunction of the • Switch the appliance off and on. appliance. The display shows iC0 or iC3. The level of water inside the • Switch the appliance off and on. appliance is too high.
  • Page 28 Problem and alarm code Possible cause and solution The appliance is switched • Power supply is out of the operating range. The wash on but does not operate. cycle is temporarily interrupted and resumes automati‐ The display shows Power cally once the power is restored.
  • Page 29 ENGLISH Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid dosage to a higher level. • The quality of the rinse aid can be the cause. The interior of the appliance is •...
  • Page 30: Technical Information

    Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / Voltage (V) 200 - 240 Electrical connection Frequency (Hz)
  • Page 32 www.aeg.com/shop...

This manual is also suitable for:

Proline clgvi955pProline a9szgb01902 979 555

Table of Contents