Auto Store - Philips DC512 Operating Instructions Manual

AUTOSTORE
By simply pressing one key you can automatically store 6 stations on the current
waveband (except on SW).
Use Auto-Store to quickly find the strongest stations, for example when travelling
through different reception areas.
When you use Auto-Store, the new stations replace any stations previously stored on
the current waveband.
The AST search begins from the currently-tuned frequency.
AUTOMATICALLY STORING STATIONS ON PRESET KEYS
Select the waveband on which you want to store the stations with the BND key.
Press the AST key.
— The set gives a beep and then mutes.
~ The display shows 'AST'.
— The radio stores 6 stations on the current waveband.
— When it has finished you hear a beep.
Interrupting Auto-Store: If you accidentally press the AST key, you can cancel
the Auto-Store function by switching the set off and then on again before the AST
function has been completed.
Recalling Automatically-stored stations
[4] Select the desired waveband.
[2] Use the preset keys (1-6) or use Preset Scan.
Notes:
~ Sometimes it may not be possible to find six stations. In this case, the remaining
presets (for example 5 and 6) are programmed with '0000'.
— Auto-Store is not available on SW* (the set gives an error beep).
* only for certain versions.