Page 1
Always there to help you Register your product and get support at www.philips.com/welcome CEM2101G CEM2101G Question? CEM2101R CEM2101R Contact Philips User manual...
Contents 7 Adjust system settings Turn beep sound on/off Turn demo mode on/off 1 Important Dimmer Safety Dance Notice Reset 2 Your car audio system 8 Additional information Introduction Detach the front panel What's in the box Replace fuse Overview of the main unit Remove the unit 3 Get started 9 Product information...
1 Important • The apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Safety Notice • Read and understand all instructions before you use your apparatus. If damage is Any changes or modifications made to this caused by failure to follow instructions, the device that are not expressly approved by...
Please observe the Congratulations on your purchase, and local regulations regarding the disposal of welcome to Philips! To fully benefit from the packaging materials, exhausted batteries and old support that Philips offers, register your product equipment. at www.philips.com/welcome. Introduction The making of unauthorized copies of copy-...
What's in the box Check and identify the contents of your package: a Main unit (with a sleeve) b Front panel c Trim plate d Carrying case for front panel e ISO male connector f Rubber cushion g Screw x 1 pc h Disassembly tools x 2 pcs i User manual...
Overview of the main unit e ZONE a SOURCE • Select tuner band. • Select audio source. • Select MP3/WMA folder. b MENU • Switch music listening zone. • Access system menu. • Eject disc. • Return to previous menu. • USB socket.
Always follow the instructions in this chapter in sequence. • Select preset radio station No.6. If you contact Philips, you will be asked for the • Start play. model and serial number of your apparatus. The • Pause or resume play.
Page 8
Note on the power supply lead (yellow) • When you connect other devices to this apparatus, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection •...
Page 9
RE AR AUX REAR FRONT Remove the mounting sleeve with the supplied disassembly tools. Connector Connect to Antenna ANTENNA Front right FRONT LINE OUT R speaker (Socket) FRONT LINE OUT L Front left speaker (Socket) • The pin arrangement for the ISO connectors depends on the type of vehicle you drive.
Place the supplied rubber cushion over the end of the mounting bolt. Slide the unit into the dashboard until you hear a click sound. Turn on To turn on the unit, • Press To turn off the unit, • press and hold until the unit is turned off.
4 Listen to radio Set clock Press MENU repeatedly until current time is flashed. Rotate to set hour. Tune to a radio station Press to confirm. Rotate to set minute. Press SOURCE repeatedly to select radio Press to confirm. mode. Press BAND or repeatedly to Set clock format select band: [FM1],[FM2], [FM3], [AM1],...
Select tuner sensitivity Play with RDS To receive more radio stations or only stations The RDS (Radio Data System) function with strong signal, you can adjust the tuner operates only in areas with FM stations sensitivity. broadcasting RDS signals. If you tune to an RDS Press MENU repeatedly until [LOCAL] is station, the station name are displayed.
Page 13
Set region for AF tuning DRAMA Radio plays and You can define AF tuning region: literature CULTURE Culture, religion and [REG Only stations in current region can society be tuned to automatically. SCIENCE Science [REG All stations can be tuned to VARIED Entertainment programs OFF] automatically.
5 Play audio files Set RDS clock You can use time signal that is broadcast together with the RDS signal to set the clock of Note the unit automatically. Press MENU. • Ensure that the disc or device contains playable files. repeatedly until [CT] is Press displayed. Rotate to select a setting: Play a disc • [CT ON]: turn on the RDS clock.
Play from USB Play options Search for an MP3/WMA track Note • Search within the current folder Ensure that the USB device contains playable music. Press » The name of the current track is displayed. Insert the USB device Rotate to select anther track in current Slide the USB socket cover marked folder.
6 Adjust sound Repeat play During play, press REP. » [REPEAT] is displayed. Rotate to select a setting. Adjust volume [REP TRK] (repeat one track): play current • track repeatedly. [REP FLD] (repeat a folder): play all tracks • Turn clockwise/counterclockwise to increase/ in the current folder repeatedly.
• [JAZZ] (jazz) Rotate to select a value. Switch music listening zone Philips’ innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience more vivid spacial effect as the artist is intended to create.
7 Adjust system Dance settings You can turn on or off the spectrum on the LCD display. Press MENU. repeatedly until [DANCE] is Press displayed. Turn beep sound on/off Rotate to select a setting: • [DANCE ON]: turn the spectrum on. Each time you press a button, the unit beeps.
Push the right side of the panel leftward. Note • If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. Remove the unit Pull the panel towards you to disengage it from the chassis.
• USB data error. Check the USB device. requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
Page 22
11 Glossary A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. RDS (Radio Data System) RDS tuners can automatically tune in stations according to the types of music (or talk) they broadcast.