Replacing The Interior Light - Beko GNE 45730 Manual

Replacing the Interior Light

Bulb
Should the light fail to work, proceed as follows:
1. Switch off at the socket outlet and pull out the
mains plug.
• Remove all shelves and drawers for easy
access.
2. Use a flat tipped screwdriver to gently remove
the light diffuser cover by inserting the blade to
prise off each side. Take care not to damage the
plastic cover and inner liner.
3. First check that the bulb hasn't worked loose
by ensuring that it is screwed securely in the
holder. Replace the plug and switch on. If the bulb
works, replace the light cover by inserting the rear
lug and pushing up to locate the front two lugs.
4. If the light still fails to work, switch off at the
socket outlet and pull out the mains plug. Replace
the bulb with a new 15 watt (max) screw cap E14
(SES) bulb.
5. Carefully dispose of the burnt-out light bulb
immediately.
Replacement light bulb can easily be obtained
from a good local electrical or DIY store.
EN
24