1.3 Read before Use Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well. On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SD card status. 1.7 Add Device: Connection via the Foscam App Scan the QR code below to download and install the Foscam APP.
1.9 Waterproof Lid Installation Guide When mounting your camera outdoors, you are suggested to install the waterproof lid for it. You may follow the steps for installation. 1. Thread the Ethernet cable through the top cover and then the waterproof connector. 2.
Support maximum 120dB alarm siren Ethernet One 10/100Mbps RJ45 port Network Remote Access Network Protocol IP, TCP, UDP, SMTP, FTP, DHCP, RTSP System Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Operating System Requirements Android (Foscam app), iOS (Foscam app) Other Features Auto Tracking...
Page 8
Alarm via E-Mail, FTP and Foscam app when an event is Motion Detection detected Alarm via E-Mail, FTP and Foscam app when an event is Sound Detection detected Alarm via E-Mail, FTP and Foscam app when an event is Human Detection...
Need help?
Do you have a question about the SD8EP and is the answer not in the manual?
Questions and answers