1.4 Physical Description LED: 6pcs Infrared-LEDs, night vision range up to 50 metres / 164ft. Lens: High Definition Color CMOS Sensor sensor with zoom lens. Antenna: Wireless Antenna Power: Connect the external power adapter, request for 12V / 2A power. LAN: 10/100M adaptive Ethernet interface.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well. On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SD card status. 1.6 Add Device: Connection via the Foscam App Scan the QR code below to download and install the Foscam APP.
2. Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector. Note: The rubber seal ring provided has been cut. If not, you may manually cut it. 3. Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet port.
Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Operating System Requirements Android (Foscam app), iOS (Foscam app) Alarm via E-Mail, FTP and Foscam app when an event is Motion Detection detected Alarm via E-Mail, FTP and Foscam app when an event is...
Page 8
-20°C ~ 60° (-4°F ~ 140°F) Environment Operating Humidity 20% ~ 85% non-condensing Storage Temperature -20°C ~ 60° (-4°F ~ 140°F) Storage Humidity 0% ~ 90% non-condensing Certification FCC, CE, RoHS, UKCA, IP66 For other parts, please refer to the “FOSCAM Camera User Manual”...
Need help?
Do you have a question about the SD4 and is the answer not in the manual?
Questions and answers