Configuration; Easy Search Utility - D-Link DNS-33 User Manual

Section 3 - Configuration
When first powered on, during the initial boot sequence, the DNS-323 will wait to be assigned an IP address via DHCP. If it
does not receive an assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32. It is recommended
to use the included D-Link Easy Search Utility when accessing and configuring the DNS-323 for the first time. If you want to
change the IP address before logging in or are unable to connect to the DNS-323 IP address, you can use the Easy Search
Utility provided on the product CD to locate the device on your network and make any needed changes.
Network Storage The Easy Search Utility displays all available DNS-323
Device
devices on the network here.
Refresh
Refresh the device list.

Configuration

Click Configuration to access the Web-based utility of
the DNS-323.
Language
Click Language if you wish to store non-English character
files. Refer to page 74.
BitTorrent Click BitTorrent to use the built-in BitTorrent manager to
upload and download Torrents. Refer to page 59.
LAN
Configure the LAN Settings for the DNS-323 here.
Apply Click Apply to save and activate the changes to the LAN
Settings.
Drive Mapping Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter. Click Connect to map
Letters the selected volume. Click Disconnect to disconnect the
selected mapped volume.
Exit Click Exit to close the utility.
D-Link DNS-33 User Manual
Configuration

Easy Search Utility

1