Lan - D-Link DNS-33 User Manual

Section 3 - Configuration
The Local Area Network settings for the DNS-323 are configured on the LAN page.
The LAN Link Speed is set to Auto
Link Speed
by default, but can be manually set
to 100Mbps or 1000Mbps.
DHCP Client
Selecting DHCP Client will cause
the DNS-323 to obtain an IP address
from the local DHCP server.
Static IP
Selecting Static IP requires you to
assign the IP information for the
DNS-323 manually.
Jumbo Frame Click the Enable radio button next
Settings to Status to enable jumbo frames.
MTU
Select an MTU rate that your
network can support and then click
Apply to activate the new setting.
D-Link DNS-33 User Manual

LAN

3