Solight WO785-1 Quick Start Manual

EN Rechargeable LED Solar Lighting Solight WO785-1
Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve
you safely and to your full satisfaction. This will prevent misuse or damage. Avoid unprofessional handling of this appliance and
always observe the electrical appliance usage guidelines. Keep the instruction manual carefully.
Specifications
Power input
Luminous flux
Light temperature
Battery
Net luminous time
Reflector dimensions
Product description
Solar panel
Holder
LED
PIR sensor
Preparation before installation
Before assembly, build the parts as shown in the pictures below:
Attach the bracket marked "A" to the back of the
solar panel (also
and tighten the hinge by hand.
Installation - Option 1
Fix the luminaire to the wall
using the screw holes.
max. 11W
1200lm
3000K, 4000K, 6500K
Li-Ion 3.7V 4400mAh
min. 1hr.
16x18,5x4cm
marked "A")
Slide the solar panel with bracket
"B" onto bracket "A" on the
luminaire and secure with
Light sensitivity setting
Max. detection distance
Sensor detection angle
Solar panel
Class of protection
Panel dimensions
The Joint
The Joint
Attach the bracket marked "B" to the back of the
lamp (also marked "B") and tighten the hinge by
hand.
Connect the solar panel to the
luminaire
10-1000lux
8 m
160°
2,5W, 5V
IP54
18x15x1,7cm
Holder
Switch
PIR sensor
Sensor
settings
Connect the
connector