Solight WM58 Quick Start Manual

LED WIFI smart RGB strip for TV, 4x50cm, USB Solight WM58

Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve

you safely and to your full satisfaction. This may prevent misuse or damage. Avoid unprofessional handling of this appliance and

always observe the electrical appliance usage guidelines. Keep the instruction manual carefully.

Notice

 Avoid placing the luminaire near objects that are sources of heat or moisture.

 Do not look directly at a lit luminaire for long periods of time as this may cause discomfort or damage to your eyes.

 Do not expose the luminaire to the outdoors, direct rain or immerse it in water. The luminaire is intended for indoor use.

 Periodically wipe the luminaire with a dry or damp cloth only when the luminaire is unplugged.

Parameters

Power

Operating

temperature

Controller range

The LED strip is suitable for TVs with 32-65" (80-165cm) screen. Install the strip according to the pictures below depending on the

diagonal size of the TV.

Belt

USB 5V, 1200mA

6 W; max. 260 lm/m

-20 °C ~ +60 °C

5 m

Driver

Battery CR2032 3 V

4x 50cm LED strip, 1x wifi module, 1x remote control,

1x power cable, 3x flexible connector, 3x fixed connectors

Table of Contents

Do you have a question about the WM58 and is the answer not in the manual?

Page 1 LED WIFI smart RGB strip for TV, 4x50cm, USB Solight WM58 Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your full satisfaction. This may prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines.
Page 2 STEP 4 Tap the device to control it according to the functions offered by the app you downloaded, e.g. the Smart Life app mentioned above. You can find the video guide on Youtube by searching for the term solight led smart wifi or scan the QR code Note: The lights can only be connected to 2.4GHz WIFI.