Download Print this page

Aiwa CX-NV8000 Operating Instructions Manual: Basic Operations

Aiwa compact disc stereo system operating instructions model cx-nv8000.
Hide thumbs

Advertisement

BASIC OPERATIONS
LOADING DISCS
RANDOM
REPEAT
0-9,+1o
Press the CD button, then press the=
OPENICLOSE
button to open the disc compartment.
Load disc(s)
with the label side up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press the DISC CHANGE button to rotate
the trays after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing the = OPEN/CLOSE
button.
cDISC
CHANGE
Tray 1
L
Tray number of the
Total playing time
disc to be played
Total number of tracks
PLAYING DISCS
Load discs,
To play all discs in the disc compartment,
press the
+>
button.
Play begins with the disc on tray 1.
Elapsed playing time
'
Number of track
being played
To etop play, press the
button.
To pause play, press the I I button. To resume play, press again.
To search for a particular point during playback, keep the
++
or
F button pressed and release the button at the desired
point.
To skip to the beginning
of a track during playback,
press
the ++
or >>
button repeatedly.
To remove discs, press the ~ OPEN/CLOSE button.
To start play when the power is off (Direct Play Function)
Press the CD button. The power is turned on and play of the
loaded disc(s) begins.
To replace discs before play, press the ~ OPEN/CLOSE button
to open the disc compartment.
To
check the remaining time
Press the CD EDIT/CHECK button during play. The amount of
time remaining until all tracks finish playing is displayed. To
restore the play time display, repeat the above again.
Selectina
a track with the remote control
1
2
Press &e of the DISC DIRECT PLAY buttons to select a disc.
Press the numeric buttons and the +1O button to select a
track,
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +1O and O buttons.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press the DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the =
OPEN/CLOSE
button
to close the disc
compartment.
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
. Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions.
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The selected disc is played once,
9
ENGLISH

Advertisement

Chapters

   Also See for Aiwa CX-NV8000

   Related Manuals for Aiwa CX-NV8000

This manual also for:

Nsx-v8000

Comments to this Manuals

Symbols: 0
Latest comments: